I install a JDM/Eudm cluster onto my 2012 fit sport everything works but after I switch the cluster my a/c knobs steering wheel and gear indicator all would light up. I know that some pins need to be move around just don't know which ones. Can anyone help with this???

 

You might need to do some searching on the forums on wiring. I had a JDM one years ago but sold due to this issue and did not want to bother figuring out this wiring fiasco.

 

Did you rewire or just plug it in?

 

I jumped a few pin around but wasn't able to get it to work

 

Bring this thread back from the dead lol... Can anyone help?? Going crazy looking for solutions but can't find anything

 

So, i put a jdm gd3 dash into my nz gd1. Out of the 30-40 wires around 10-15 were an easy swap.

Can you take photos of your dash, the part number on the back, the same for the JDM one.

Also need close ups of both sets of plugs, I'm guessing (hoping) you got the plug and short but if wiring with the JDM dash??

Also, the are functions like remote locking etc in the cluster. I lost this with my swap but it didn't work right anyway.

Send the pics to jrhpng@gmail.com.

 

I also need to be able id the wiring colours..

 

I'm just doing a cluster swap I only have the JDM/EUDM cluster for the ge8 I can send you a pic of the part number and the wiring of my USDM fit

 

You don't have the plug it wiring from the new one?

 

No.. I'm trying to find the wiring diagram for the new one to compare it to the USDM wiring

 

check out his thread
https://www.fitfreak.net/forums/2nd-gen-ge8-specific-fit-interior-modifications-sub-forum/93185-defi-gauge-garage-amis-jdm-fit-rs-speedometer-emblem.html