My GE8
#1
Swflej1 GE8 progress thread
I decided to make my own build thread and I've been adding a few things here and there. Plus I think it would be easier for me to keep track of my Mods.
The Day I got her. The one on the right, she replaced the Lancer in the back.
1st thing I did was took of the pin strip
JDM wiper mod on day 3
I re-wrapped the headliner
Tinted and added I-VTEC SOHC decal
I installed the map light and Accord horn plus added sport key less entry.
Legend Brakes
test fit Mini rotors and Legend brakes
another test fit wit XXR wheels
Rims on wrapped in Yokohama S. Drives
Swapped base hatch for sport hatch came with the RS badge have to re-do wiper mod. Also added depo tail lights
OEM Visors
The Day I got her. The one on the right, she replaced the Lancer in the back.
1st thing I did was took of the pin strip
JDM wiper mod on day 3
I re-wrapped the headliner
Tinted and added I-VTEC SOHC decal
I installed the map light and Accord horn plus added sport key less entry.
Legend Brakes
test fit Mini rotors and Legend brakes
another test fit wit XXR wheels
Rims on wrapped in Yokohama S. Drives
Swapped base hatch for sport hatch came with the RS badge have to re-do wiper mod. Also added depo tail lights
OEM Visors
Last edited by swflej1; 06-04-2015 at 12:37 PM.
#3
Kinda wish, but no me and the wife have the same car . XXR are 15x7 +25 offset on stock height no rubbing, just need to drop it which maybe soon.
#5
Thanks, Her car is little more modded then mine. And has been that way for some time but mines is finally catching up kinda
#7
#11
the same way in the link I posted,
1) pull down your dome light then run a wire between the two .
2) then splice one end into the dome line ( a wiretap will work great)
3) the other end you use a female spade wire connector with some heatwrap around it
4) plug spade into the map light the one closest to the inside of the light.
5) tuck any extra wire and reinstall lights.
check out the link below for all the pics, it's not in English but it's easy to under stand.
D.I.Y
Good Luck with the mod just take your time.
1) pull down your dome light then run a wire between the two .
2) then splice one end into the dome line ( a wiretap will work great)
3) the other end you use a female spade wire connector with some heatwrap around it
4) plug spade into the map light the one closest to the inside of the light.
5) tuck any extra wire and reinstall lights.
check out the link below for all the pics, it's not in English but it's easy to under stand.
D.I.Y
Good Luck with the mod just take your time.
#15
Thanks guys for the comments. I'll be lowing it soon but I keep going back and forth on what I want.
Sweet good luck!
The pics above doesn't have any pads installed, If you look at my last build page (link below). You can see that the pads fit fine, I've been running this setup for a while now if no problems. Later this week or early next week I have to rotate my tires I'll take some better pics.
https://www.fitfreak.net/forums/2nd-...e8-fits-4.html
Sweet good luck!
https://www.fitfreak.net/forums/2nd-...e8-fits-4.html
#19
Thanks man, I'm going to have to redo it sometime soon. Maybe when it gets cooler out.
Last edited by swflej1; 11-01-2014 at 02:05 PM.