::::::: SOLD - THESE ARE NO LONGER AVAILABLE - SOLD :::::::::

I gotta get rid of stuff laying around in my small apartment. So these have to go.
These were on my car for 4 months--all LED's work.

These weren't plug and play so I had to modify the reverse light socket to fit the brake light plug (You use your brake lights as your reverse light). LED's work and look good. 1 of the rods snapped on the right hand tail, but the other 2 still work, and the taillight is still very secure.

Asking $130 shipped to mainland US.










This part broke off. The other two are intact. The tail lights will still be safely secured to your Fit!

INSTALLATION
This is not that hard to do. I am a novice with cars and even I managed to do this.

What you will need:
1) Your OEM Bulb Holders for Brakes and Turn Signals and their bulbs from your OEM tail lights. You will need both sets.






2) Plugs (This part I had to order separately from a Honda Dealer-- But you won't have to because I WILL INCLUDE THESE)





Ok go to your Fit and open the tail light panel in the trunk...


This is the reverse light plug. You have to unlatch this green plug and plug the 2 wires back into the gray plugs which I will provide.
Don't lose that green plug you unlatched. Keep it in case you want to go back to OEM.


Notice the position of the wires in the gray plug.

THAT'S IT. ENJOY YOUR NEW TAIL LIGHTS!

 

If I buy these off you, will it be plug and play on my end? Or I need to make modifications to them before I can use them.

 

They are not plug and play. But the installation is easy.