GE8 Lowered Thread - Post your pics!!!
finally got my car back from paint. still not finished though, still need to get the mirrors painted, install my sideskirts, and colorsand and buff. i ended up having to pull the car out of the shop early because i didn't have any transportation to get me to work. but anywhoo, here it is.
with the lover souls
with the lover souls
fender liner's are still there. i only rolled the fenders and quarter panels a little bit to fit the vs-xx's. haven't made any cutting.
anybody slammed on 15's?
I searched through most of the thread but didnt see anything.
I found some pretty rare, old school, wheels that I might purchase as dailies but was just curious what 15's would look like on a 2nd gen
I searched through most of the thread but didnt see anything.
I found some pretty rare, old school, wheels that I might purchase as dailies but was just curious what 15's would look like on a 2nd gen
Does anyone have some good pics of the t1r s-coils installed with 205/40/17's?
I think i'm finally gonna go for the plunge but i'm worried because i really don't wanna roll/pull/cut etc and the front 2 wheels on mine are already nice and flush which looks nice but im still gonna leave the rears without spacers because i load my bass gear in the back and i need the fender room for that.
thoughts? thanks
I think i'm finally gonna go for the plunge but i'm worried because i really don't wanna roll/pull/cut etc and the front 2 wheels on mine are already nice and flush which looks nice but im still gonna leave the rears without spacers because i load my bass gear in the back and i need the fender room for that.
thoughts? thanks
*doool* airrunner....
misFit - your car looks pretty awsome with the stance and the kit...how careful do you have to be with the Mugen lip inches from the pavement?!
Loving the stock wheels to!
misFit - your car looks pretty awsome with the stance and the kit...how careful do you have to be with the Mugen lip inches from the pavement?!
Loving the stock wheels to!
Member
Joined: Sep 2009
Posts: 330
From: Travelers Rest, SC
They arnt rota slipstreams, because the rotas don't come in a 15x6.5 et 38. Probably Nippon Racing F-2.
F-2 Racing 15" 4x100 White - Sparktec Motorsports
Manufacturer's Description:
Color: White
Size: 15x6.5
Offset: +38
Bolt Pattern: 4x100
Holes: 4
F-2 Racing 15" 4x100 White - Sparktec Motorsports
Manufacturer's Description:
Color: White
Size: 15x6.5
Offset: +38
Bolt Pattern: 4x100
Holes: 4
They arnt rota slipstreams, because the rotas don't come in a 15x6.5 et 38. Probably Nippon Racing F-2.
F-2 Racing 15" 4x100 White - Sparktec Motorsports
Manufacturer's Description:
Color: White
Size: 15x6.5
Offset: +38
Bolt Pattern: 4x100
Holes: 4
F-2 Racing 15" 4x100 White - Sparktec Motorsports
Manufacturer's Description:
Color: White
Size: 15x6.5
Offset: +38
Bolt Pattern: 4x100
Holes: 4
i thought so too for a while but i found out who makes them
I need advice:
I have +40 offset 205/40/17 the fronts poke about a 1/2" which i like and I want to get 20mm spacers for the rear to match eventually.
I really want to lower on springs(not enough cash for coils - maybe in a year ill do it)
I like the t1r s-coils but im worried about rubbing and i dont want to roll/pull or make camber adjustments
Does anyone have the same wheel size setup that is dropped on t1r's that has pics and doesn't rub???
Thanks in advance guys!
I have +40 offset 205/40/17 the fronts poke about a 1/2" which i like and I want to get 20mm spacers for the rear to match eventually.
I really want to lower on springs(not enough cash for coils - maybe in a year ill do it)
I like the t1r s-coils but im worried about rubbing and i dont want to roll/pull or make camber adjustments
Does anyone have the same wheel size setup that is dropped on t1r's that has pics and doesn't rub???
Thanks in advance guys!
This GE8 is so nice I'll post it here; and I drive a GD3
