The tune posted above was with the factory intake. There are no dealers in your area currently so to get the tune you'd have to purchase a unit and upload the tune yourself from a laptop. Simple process.

 

Ktuner,

Any idea if this would work on a AUDM Jazz/Fit (I can get ECU # if needed)?

Cheers.

 

Would need ECU number to answer that.

 

This is great. At some point I'd love to have a tune done. Anybody in The Washington D.C. Area tuning with your product?

 

Since there seems to be concern about interest in this a few posts back... I'll say I'm still waiting excitedly for this to become available to me.

My other car is turbo, so tuning ECU tuning is very effective, easy, and cheap. NA cars are always tough, but even just a ~6 peak whp gain in a car as light as the Fit makes a difference, and the power delivery is the biggest factor in everyday fun (which to me is most important).

ktuner any idea how much a retail version of this flash / tune would cost?

myxalplyx, i'm assuming by your signature you're trying to hit a 14.xx second 1/4 mile haha. i'm wondering a few things, if you don't mind sharing. Where did you got your parts from? What wheels/tires are you running? and someone mentioned you're local in NJ. If youre in north NJ, mind sharing any good independent shops for Hondas? Dealership doesn't install aftermarket parts and I wouldn't want them to anyway, and I don't have time for DIY crap any more.

It's also funny you mention the Fiesta ST. With a good tune, suspension upgrades, and sticky tires, I have faith that this car can at least give it a decent run for its money.

 

Absolutely! Original goal was a low 16, then a high 15 but that went by way quicker than I thought. I'd like to go for it late February-April while it's cold out if tuning gets underway. **Crossing Fingers**


Intake is homemade. Throttle body was sent out to be bored by Maxbore. Exhaust parts I purchased from Japan (J's Racing through Jesse Streeter). Pulley was custom made by NST (Non Stop Tuning). Cams were custom grinded by Deltacams. Wheels/tires are 14" Kosei K1 TS wheels and General Altimax tires. Wheels are 9.3lbs and tires are 15lbs. Both are very light.

I'm in Delaware but occasionally hit-up Atco Raceway and Englishtown to race at events. Sometimes I race Tuesday nights at Atco-Gamblers Bracket Racing. Wednesdays and Friday I frequent Cecil County Dragway. Most of the time I'm testing ideas with minor changes to see what works and what doesn't. This is a CVT that ran 17.1-17.2 stock so every little thing counted.

I know of no Honda Shops! I B.S. around scavenging for parts like I'm homeless. My intake is laughable but VERY effective.

 

Good to know the ECU is cracked. Waiting for someone to turbo the new L15b now and actually post videos of the car running.

 

Any updates?

 

so I noticed today on speedfactorytuning's istagram account they are tuning a 15 cvt fit with ktuner.

 

Yes, we'll be posting the support part numbers on the site shortly. The software has Tune 1 included in it and is available to be tuned / remote tuned by dealers. Kenny @ SpeedFactory/TurbogixxerTuning is getting ahead on the platform.

 

I'm still watching. The direct injection and integrated exhaust manifold seems like a huge tuning bottle neck. I'm concerned leaning this engine further could aggravate the GDI coking issue. Any thoughts about how a tune could accelerate valvetrain issues?

 

Looking nice, thinkin about a tune. Is that factory tune on premium gas?

 

Picked up our Ktuner today, will keep you guys posted, I wont do much tuning until there is a downpipe on the market

 

Wish i can have a down pipe, but all my car is loud, so gotta keep 1 quiet.

 

RV6 is working on that!

 

hi KTuner - if we adapt the new civic 1.5T turbo parts on our motors, can we use KTuner to tune the ecu?

 

Any updates?

 

bump - any updates

 

The software has Tune 1 included and Kenny @ SpeedFactory/TurbogixxerTuning is offering remote tuning services for this ECU platform. Since March.

 

Hey , ge8 here about to get my Zage turbo kit and spoke with you briefly via e-mail. Do you have a linux binary or do I have to use windows ? I only have a linux laptop