TofuShop's Build Thread - (BBS, Clazzio, Morimoto, etc) *Picture Heavy*
#65
Thanks for the compliment
Thanks for the compliment.. I ran the Tanabe coilovers for 5,000 miles then the Ground Control + Koni setup for 3,000 miles. Both were designed for the GE8. The rebound on the Tanabes are very stiff and i got annoyed after a while. Switched to Konis because I have used them in previous cars and are very comfortable. Mileage is low on the Koni/GC setup because I pulled all the parts off and traded the car in. I do not drive much either, so that is why miles are low.
#66
Car is stripped and sold! Remaining parts for sale are below:
BBS CS4 wheels:
https://www.fitfreak.net/forums/3rd-...t38-4x100.html
WC Lathewerks and delrin shift knobs:
https://www.fitfreak.net/forums/3rd-...hiftknobs.html
Ground Control coilover sleeves + Koni STR orange shocks (fits GE8 and GK5):
https://www.fitfreak.net/forums/3rd-...ge-shocks.html
Progress rear sway bar:
https://www.fitfreak.net/forums/3rd-...-sway-bar.html
Tanabe Touring Medalion Axleback:
https://www.fitfreak.net/forums/3rd-...k-exhaust.html
Tanabe Pro S-0C coilovers (fits GE8 and GK5):
https://www.fitfreak.net/forums/3rd-...coilovers.html
Automotive Touchup OEM Honda White Orchard Pearl paint (1 pt):
https://www.fitfreak.net/forums/3rd-...ite-pearl.html
Genuine OEM Honda GK5 foglamp housings:
https://www.fitfreak.net/forums/3rd-...-foglamps.html
Spoon Rigid collars (front and back):
https://www.fitfreak.net/forums/3rd-...d-collars.html
H&R 25mm spacers:
https://www.fitfreak.net/forums/3rd-...m-spacers.html
BBS CS4 wheels:
https://www.fitfreak.net/forums/3rd-...t38-4x100.html
WC Lathewerks and delrin shift knobs:
https://www.fitfreak.net/forums/3rd-...hiftknobs.html
Ground Control coilover sleeves + Koni STR orange shocks (fits GE8 and GK5):
https://www.fitfreak.net/forums/3rd-...ge-shocks.html
Progress rear sway bar:
https://www.fitfreak.net/forums/3rd-...-sway-bar.html
Tanabe Touring Medalion Axleback:
https://www.fitfreak.net/forums/3rd-...k-exhaust.html
Tanabe Pro S-0C coilovers (fits GE8 and GK5):
https://www.fitfreak.net/forums/3rd-...coilovers.html
Automotive Touchup OEM Honda White Orchard Pearl paint (1 pt):
https://www.fitfreak.net/forums/3rd-...ite-pearl.html
Genuine OEM Honda GK5 foglamp housings:
https://www.fitfreak.net/forums/3rd-...-foglamps.html
Spoon Rigid collars (front and back):
https://www.fitfreak.net/forums/3rd-...d-collars.html
H&R 25mm spacers:
https://www.fitfreak.net/forums/3rd-...m-spacers.html
#71
When doing the retrofit, any dremeling/cutting needed?
I think I've seen that CT guy, on the lexus forums
I think I've seen that CT guy, on the lexus forums
#73
Those seat covers
Everytime i see a build with the clazzio's, I'm inspired. But I'm left to wonder, do they stay firmly in place- how have they stood the test of time? It's been a couple years since you installed them, can you post a pic update of what they look like after being sat in fir thousands of miles?
(excellent build thank you for sharring)
(excellent build thank you for sharring)
Thread
Thread Starter
Forum
Replies
Last Post
Vtekmofo
2nd Generation GE8 Specific For Sale/WTB Used Parts Sub-Forum
15
05-18-2015 12:55 PM
Cl9lover
2nd Generation GE8 Specific Wheel & Tire Sub-Forum
25
09-12-2012 09:03 AM
jazzawockee
For Sale / Want To Buy / Classified Ads for USED Fit Items
5
09-06-2008 09:01 PM