Unofficial Honda FIT Forums

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)
-   3rd Generation GK Specific Fit Photos & Videos Sub-Forum (https://www.fitfreak.net/forums/3rd-generation-gk-specific-fit-photos-videos-sub-forum/)
-   -   TofuShop's Build Thread - (BBS, Clazzio, Morimoto, etc) *Picture Heavy* (https://www.fitfreak.net/forums/3rd-generation-gk-specific-fit-photos-videos-sub-forum/89663-tofushops-build-thread-bbs-clazzio-morimoto-etc-picture-heavy.html)

TofuShop 05-30-2015 02:27 PM

TofuShop's Build Thread - (BBS, Clazzio, Morimoto, etc) *Picture Heavy*
 
Hi all,

Wanted to document my Fit build as it has already started spiraling more than i wanted to. Modlist so far below:

Exterior:
-DDM Tuning 4300k HIDs (headlamps)--old
-DDM Tuning 3000k yellow HIDs (foglamps)--old
Replaced with:
-Morimoto mini H1 retrofit with Apollo 2.0 flat shrouds--new
-Morimoto XB35 projector LED foglamps sprayed in JDM Vans golden yellow--new
-College Hills Honda Sport Horn kit
-eBay Mugen style front lip
-eBay Mugen style side skirts


Interior:
-Suntek Carbon XP 80% tint
-WC Lathe Werks flame burnt bronze sphere shift knob
-Ebay perforated synthetic steering wheel wrap (stitched)
-Clazzio Quilted Diamond stitched seat covers
-eBay J's Racing style steering wheel red H emblem
-DIY Home Depot seat spacer mod

Audio:
-Pioneer TS-SWX2502 10" slim subwoofer
-Boss amp

Suspension:
-Tanabe Pro S-0C coilovers (from GE8)--old setup
-Koni orange STR dampers
-Ground Control 425# (5" long) front and 430# (7" long) rear
-Progress rear sway bar

Engine:
-Tanabe Touring Medalion axleback

Wheels:
-BBS CS4 17x7.5 et38
-195/45/17 Yokohama S Drive tires
-Gorilla wheel locks


---

My last project was an A4 that i built inside and out. Let's just say the amount of money i spent on mods alone, i could have bought two Honda Fits:
https://c2.staticflickr.com/6/5197/1...ceaf40ba_z.jpg

TofuShop 05-30-2015 02:28 PM

DDM PNP HIDs:

https://www.fitfreak.net/forums/3rd-...-pnp-hids.html

https://farm4.staticflickr.com/3868/...41e2fb9b_c.jpg

https://farm4.staticflickr.com/3898/...525719c8_c.jpg

https://farm4.staticflickr.com/3911/...72a56a07_c.jpg

https://farm4.staticflickr.com/3836/...17b02363_c.jpg

https://farm6.staticflickr.com/5592/...b08ffb7d_c.jpg

https://farm6.staticflickr.com/5575/...8e844832_c.jpg

https://farm6.staticflickr.com/5569/...53e38a55_c.jpg

TofuShop 05-30-2015 02:30 PM

WC Lathe Werks flame burnt bronze sphere shift knob:

https://www.fitfreak.net/forums/3rd-...nt-bronze.html

https://farm6.staticflickr.com/5586/...3662923d_c.jpg

https://farm4.staticflickr.com/3887/...b6d26f96_c.jpg

https://farm4.staticflickr.com/3875/...c5838767_c.jpg

https://farm6.staticflickr.com/5554/...623931d4_c.jpg

https://farm4.staticflickr.com/3876/...402a87e8_c.jpg

https://farm4.staticflickr.com/3875/...abe95c8b_c.jpg

https://farm4.staticflickr.com/3843/...7907a558_c.jpg

https://farm4.staticflickr.com/3917/...44847435_c.jpg

TofuShop 05-30-2015 02:32 PM

Ebay perforated synthetic steering wheel wrap (stitched):

https://www.fitfreak.net/forums/3rd-...eel-cover.html

https://farm9.staticflickr.com/8749/...fac42d12_c.jpg

https://farm9.staticflickr.com/8749/...2b753932_c.jpg

https://farm8.staticflickr.com/7640/...d2ea5179_c.jpg

https://farm9.staticflickr.com/8670/...f9b701bb_c.jpg

https://farm8.staticflickr.com/7281/...ed8dcfda_c.jpg

https://farm9.staticflickr.com/8633/...549b5656_c.jpg

https://farm8.staticflickr.com/7653/...2f21bb1f_c.jpg

TofuShop 05-30-2015 02:39 PM

Tanabe Pro S-0C coilovers (for GE8):

https://www.fitfreak.net/forums/3rd-...-fit-gk5s.html

https://c4.staticflickr.com/8/7796/1...11fc81c3_z.jpg

https://c4.staticflickr.com/8/7768/1...a24cacab_z.jpg

https://c4.staticflickr.com/8/7788/1...282e13f6_z.jpg

https://c1.staticflickr.com/1/466/18...6f442fab_z.jpg

https://farm9.staticflickr.com/8795/...2ac17223_c.jpg

Front gap:
https://farm9.staticflickr.com/8836/...4768ea32_c.jpg

Rear gap:
https://farm9.staticflickr.com/8843/...8591fe09_c.jpg

Front (with helper springs removed so i could go lower):
https://farm8.staticflickr.com/7666/...543d8b06_c.jpg

Rear (with one of the locking collars removed):
https://farm9.staticflickr.com/8837/...e5fc16c7_c.jpg

https://c1.staticflickr.com/9/8881/1...04cbfaf8_z.jpg

https://c1.staticflickr.com/9/8829/1...99f782b2_z.jpg

https://c4.staticflickr.com/8/7695/1...8dacbb95_z.jpg

https://c2.staticflickr.com/6/5447/1...2b65d86d_z.jpg

TofuShop 05-30-2015 02:42 PM

Clazzio Diamond Stitched (Quilted) seat covers (first GK5 in North America):

https://c4.staticflickr.com/8/7768/1...e087f121_z.jpg

https://c1.staticflickr.com/9/8771/1...ea92047e_z.jpg

https://c1.staticflickr.com/9/8844/1...a49a962c_z.jpg

https://c1.staticflickr.com/9/8884/1...1c1fb888_z.jpg

https://c1.staticflickr.com/9/8769/1...344f7369_z.jpg

TofuShop 05-30-2015 02:43 PM

BBS CS4 wheels:
https://c4.staticflickr.com/8/7700/1...9a3511fe_z.jpg

https://c1.staticflickr.com/1/545/17...3247f3d8_z.jpg

https://c4.staticflickr.com/8/7743/1...a9767e5f_z.jpg

robertsmithfromthecure 05-30-2015 07:46 PM

Very very nice. I've been waiting to see your seats and the wait was worth it; those look so comfy I want to fall asleep in them! Wheels look great; everything looks really well done. Thanks for posting.

charlie a.k.a. chuck 06-01-2015 02:34 PM

Your car looks great. How bad is the glare with the HIDs?

TofuShop 06-02-2015 10:39 PM

Thanks for the complements. the Clazzios are much higher quality than i expected. very comfortable and more than i could have wished for.

the glare is pretty bad. i aimed them way down so i won't blind people as badly.. but i still get high-beamed by oncoming traffic. i have a morimoto retrofit kit i need to get around to installing

some more pics from this past weekend:
https://c1.staticflickr.com/9/8808/1...65f4ecc2_z.jpg

https://c1.staticflickr.com/9/8822/1...e0f7afae_z.jpg

https://c1.staticflickr.com/9/8891/1...f524da8f_z.jpg

onlyrotary17 06-17-2015 04:12 PM

where/who did you order the bbs cs4's through? (I want to order them for my black EX..) I went on tirerack and it says they aren't available for the Fit..:confused:

love what you've done to yours!

Also, will the ET30 ones not clear??

TofuShop 06-20-2015 12:12 AM

There's a reason why they're not offered for the car: they don't fit.

Lots of work was done to make them fit. Front fenders rolled and pulled 1/2", front fender liners cut, rear fenders rolled, rear fender liners cut. I still rub a little when i hit a bump and my wheel is turned.

https://c1.staticflickr.com/1/456/18...a31032fa_z.jpg

https://c4.staticflickr.com/4/3690/1...73a70e8e_z.jpg

Xtina 06-30-2015 11:06 PM

I need these O_O

Desmond Lamar MacRae 08-03-2015 07:00 PM

You HID's must be 6000k. There isn't much light. I had 6000K in my 08 Accord coupe for a month. I was at a light when a 03 BMW 330 Coupe pulled up next to me. Stock 4100k put my 6000k to complete shame as if my DRL were on. I then decided to go with 5000k to give me a close to stock look with a touch more white. I think my next kit will be 55watts vs. the normal 35. The FIT's head light lenses don't seem to "scatter" the light like clusters years past. But i digress...

Other than not a fan of the "slammed" look, you have a very nice car. You reminded me to order my Clazzio tonight ;-). Enjoy the car bro.

TofuShop 08-05-2015 10:42 PM


Originally Posted by Desmond Lamar MacRae (Post 1315583)
You HID's must be 6000k. There isn't much light. I had 6000K in my 08 Accord coupe for a month. I was at a light when a 03 BMW 330 Coupe pulled up next to me. Stock 4100k put my 6000k to complete shame as if my DRL were on. I then decided to go with 5000k to give me a close to stock look with a touch more white. I think my next kit will be 55watts vs. the normal 35. The FIT's head light lenses don't seem to "scatter" the light like clusters years past. But i digress...

Other than not a fan of the "slammed" look, you have a very nice car. You reminded me to order my Clazzio tonight ;-). Enjoy the car bro.

They are definitely 4300k--considering i ordered and installed them myself. You can also see the pure white color (no hint of blue or any other color except white). The reflector bowl is too large and isn't designed for HIDs, so the light diffracts and bounces all over. I've had a Morimoto retrofit kit i've been meaning to install. Just haven't had the time yet.

Thanks for the complements, though!

De36 08-06-2015 02:49 PM

Props on your build.

TofuShop 08-12-2015 10:29 PM


Originally Posted by De36 (Post 1316051)
Props on your build.

Thanks De36

If anyone is interested in buying my car as-is, i posted a feeler thread for it:
https://www.fitfreak.net/forums/sale...ml#post1316818

TofuShop 08-28-2015 04:44 PM

Meh
https://farm6.staticflickr.com/5678/...87b2a95d_c.jpg

ThatsTheTruth 09-24-2015 01:52 PM

Those seat covers :bowdown:

Myxalplyx 10-30-2015 03:03 PM

Yeah, those seat covers look really nice. Everything looks nice in general. Nice build!


All times are GMT -4. The time now is 08:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands