TougeMonster_GK5's Build Thread
Hello FF!
2015 Honda Fit EX 6MT Alabaster Silver Metallic Purchased Used at 39,000 miles, Clean Title, 3rd owner Initially purchase as a daily commuter-beater, shortly became a small money pit. Building Hondas just never gets old. The intention of my build was to craft a a track-ready, commuter friendly auto mobile. So far, I think i'm pretty close to completing it. Here are my mods so far: Mods: Engine/Transmission: K&N Drop-in Air Filter Spoon Type D Radiator Cap Spoon Magnetic Engine Oil Drain Plug Spoon Magnetic MT Oil Drain Plug Spoon Reservoir Socks DIY OEM Intake Mod (block resonator hose) Hasport Rear Engine Mount - U70A (Part No. GERR) J's Racing Oil Filler Cap **For Sale** HKS Cool Style Axel Back Exhaust RV6 downpipe Acuity Instruments Shifter Cable Bushings KTuner V2 SOLD Seeker Lightweight Oil Cap 3D Printed Custom Ram Air Scoop (TM Ram Air Scoop Thread: https://www.fitfreak.net/forums/gaug...-duct-gk5.html) Wheels/Suspension: Volk TE37RT Black Edition (4×100, 15x8, +35, 11.3lbs) + Falken Azenis RT615K+ (205/50/15)* SOLD Yokohama S-Drive (205/50/15)**Unmounted* Work Emotion CR Kai Gun Metal (4x100, 16x7 +35) + Accelera Phi R 205/45/16 FireStone FireHawk Indy 500 (205/50/16)SOLD TR MotorSports C1 Wheels (4x100, 15x17.5, +42, 12.8lbs)*SOLD Hankook Ventus V2 Concept2 (205/50/15) SOLD H&R Sport Springs (Part No. 51831) Koni STR.T Shocks (Part Nos. Front Left: 8750-1102L , Front Right: 8750-1102R, Rear: 8050-1131) Progress 19mm Rear Anti-Sway Bar Tanabe Sustec Strut Tower Barc Project Kics Iconix Lugs+Locks Project Kics WTS 10mm Wheel Spacers SOLD H&R DRS 10mm Wheel Spacer SOLD Muteki Aluminum 65mm to 56.1mm Centric Hub Rings for TE37rt's* All 4 Fenders Rolled Project Kics 5mm Wheel Spacers for the rear Megan Racing Front Roll Center Adjusters Tein Flex Z Coilovers Not Installed BeatRush Front Pillowball Mounts Not Installed Savanini Rigid Collars Not Installed Brakes: EBC Green Stuff Front Brake Pads EBC USR Front Slotted Rotors TechnaFit SS Brakelines (Part No. HN-26) Brembo Rear Brake Shoes (Part No. 30137-01182245) Not Installed Wilwood 4-Piston DHPA Kit Not Installed Interior/Exterior/Lighting: Spoon Duracon Shift Knob **unmounted** Bride ViosIII Seat (Rep) Buddy Club Racing Spec Seat Rails LED interior lights OEM Cargo Cover HiPro H4 4900K Bulbs (off) PIAA H11 2500K Bulbs OEM Honda "RS" Rear Emblem OEM Window Visors OEM Splashg Guards Short CF Antenna Yakima Baseline Towers+Round Bars+40" Fairing Yakima Rocketbox 12* JDM RS Wing Color matched (Rep) SiriusLED MX H4 LED Bulbs Amazon LED Switchback Front Parking Light Bulbs LED Rear Turnsignal Light Bulbs Acuity Instruments Gas Pedal Relocator Spoon Side view mirrors Benen Front Tow Hook Takero's GK5 RS Plus Gurney Flap Rep. Noblesse Rear Diffuser (Not installed) Rep. Mugen Side Skirts (Not installed) Ebay 3pc Lip SOLD Amazon Special Replica Type R shift knob Wishlist: BeatRush Rear Pillar Bar BearRush Lower Floor Bar HardRace Front Lower Arm Bushing HardRace Front Lower Arm Bushing (Front/Big) HardRace Front Reinforced Strut Mount HardRace Front Reinforced Stab. Link HardRace Front Lower Brace Willans Racing Harness Recaro Pole Position Seat the next morning after i purchased her 5/20/17: https://cimg0.ibsrv.net/gimg/www.fit...65e4ac7d64.jpg https://cimg5.ibsrv.net/gimg/www.fit...b92bb8b0ef.jpg Several mods later: https://cimg5.ibsrv.net/gimg/www.fit...ca4b9e4bef.jpg https://cimg6.ibsrv.net/gimg/www.fit...ed45b22f02.jpg https://cimg4.ibsrv.net/gimg/www.fit...03575e7303.jpg https://cimg7.ibsrv.net/gimg/www.fit...e9ebd3caa1.jpg https://cimg5.ibsrv.net/gimg/www.fit...cd492fa567.jpg https://cimg3.ibsrv.net/gimg/www.fit...81d394ab7e.jpg 2018 Setup https://cimg6.ibsrv.net/gimg/www.fit...29e4d35673.jpg WeatherTech Raceway Laguna Seca - June 2018 https://cimg2.ibsrv.net/gimg/www.fit...ffc099cb06.jpg https://cimg4.ibsrv.net/gimg/www.fit...b4556c987d.jpg *** 2020 Pandemic Especial Photos taken at Streets of Willow, CCW Twilight 8-15-20 https://cimg4.ibsrv.net/gimg/www.fit...56671fb7ce.jpg https://cimg5.ibsrv.net/gimg/www.fit...b2806bd1c6.jpg https://cimg6.ibsrv.net/gimg/www.fit...5a871b2716.jpg https://cimg7.ibsrv.net/gimg/www.fit...d382e6082c.jpg |
I really like the look of the wheels minus looking so darn small!
|
So decided to purchase the Koni Orange STR.T to complement the H&R springs. Will have to wait another week for their arrival and installation.
Also ordered the following: (cant seem to get my mind off of my Fit Spirited Tune lol) -Hasport Rear Engine Mount (U70A) -TechnaFit SS Brake Lines -EBC Green Stuff front pads I think I saw somewhere that Brembo makes brake shoes for our car. I'll have to research again. Sorry for lack of pictures, but would like to share the finished product once lowered. My goal for the car is for 'Spirited Commuting Driving' (Occasional canyon carving, Getting ahead of the dreaded i880/i680 communte [Oakland > n < Fremont] Btw, its rare to see other hopped up GKs in the bay area for some reason. Where you all at?! |
I'm in the valley. I've seen three or four modded Fits, other than mine, in my area so far. We tend to show up at the same bar :)
|
Originally Posted by skatana
(Post 1374341)
I'm in the valley. I've seen three or four modded Fits, other than mine, in my area so far. We tend to show up at the same bar :)
|
Originally Posted by TougeMonster_GK5
(Post 1374352)
We gotta have a bay area fun drive sometime this summer.:thumbups:
|
looking good so far! can't wait to see the setup with H&R and Koni though.
|
Originally Posted by Midnight Run
(Post 1374422)
looking good so far! can't wait to see the setup with H&R and Koni though.
|
Just came in the mail. Can't wait to throw this on. Thanks Axion Industries!!!
https://cimg0.ibsrv.net/gimg/www.fit...7f29f29c56.jpg Hardness: U70A |
|
|
Just before I head out from the office, installed the JDM emblem. Should have made it 1/4 - 2/4 inch lower. Oh well eyeballed it the best I could.
https://cimg3.ibsrv.net/gimg/www.fit...ef419f9351.jpg |
nice drop on the suspension setup! looking good!
Did you install the Hasport rear motor mount? What is your impression with it? Can i get the part # if you don't mind. Thanks |
Originally Posted by Midnight Run
(Post 1374592)
nice drop on the suspension setup! looking good!
Did you install the Hasport rear motor mount? What is your impression with it? Can i get the part # if you don't mind. Thanks http://stores.axionind.com/2015-honda-fit-gk5-hasport-rear-motor-mount/ ask for the 10% promo code!! |
that dropped pict looks so much nicer, congrats.
you can probably do 10mm spacers in the back if you want to flush that up, but then you might feel a tad bit of understeer so might want to add more camber up front. also id suggest running shorter profile tires next time to change the gear ratio. should give you a nice pickup. |
Originally Posted by kenchan
(Post 1374663)
that dropped pict looks so much nicer, congrats.
you can probably do 10mm spacers in the back if you want to flush that up, but then you might feel a tad bit of understeer so might want to add more camber up front. also id suggest running shorter profile tires next time to change the gear ratio. should give you a nice pickup. Having a hard time deciding between H&R or Ichiba: https://www.amazon.com/gp/aw/d/B00CZBHLN6/ref=mp_s_a_1_fkmr0_1?ie=UTF8&qid=1498396738&sr=8-1-fkmr0&pi=AC_SX236_SY340_FMwebp_QL65&keywords=4x100 +100mm+56.1+h%26r https://www.amazon.com/gp/aw/d/B007ZG76ZY/ref=mp_s_a_1_fkmr0_2?ie=UTF8&qid=1498396738&sr=8-2-fkmr0&pi=AC_SX236_SY340_FMwebp_QL65&keywords=4x100 +100mm+56.1+h%26r |
|
nice! :D looking good.
|
Originally Posted by TougeMonster_GK5
(Post 1374667)
Thanks for the brotherly tip! Ill definately play with some negative camber at the front after throwing on the rear spacers. I too was thinking 10mm will flush it out. Amazon prime here we go again.
Having a hard time deciding between H&R or Ichiba: https://www.amazon.com/gp/aw/d/B00CZ...0mm+56.1+h%26r https://www.amazon.com/gp/aw/d/B007Z...0mm+56.1+h%26r |
Fitted Yakima Rack with old school Q-Towers from a GD Fit. Fits snug but I think i'd rather cough up the extra $$$ for BaseLine Towers..
https://cimg1.ibsrv.net/gimg/www.fit...596654e452.jpg https://cimg4.ibsrv.net/gimg/www.fit...dcc3f491b1.jpg https://cimg5.ibsrv.net/gimg/www.fit...c4485d1d97.jpg |
All times are GMT -4. The time now is 09:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands