Planing to get 16x17 offset 30
Any issues?

 

Are you lowered? Or factory height?

I know on my GE, my 15x8 +35 fit fine...just poked out a little up front. It seems 7" width and +35 offset is perfectly flush on a GE.

 

Yes the GK will get coilovers. Which size of tres have to check
But i cant find pictures of a GK with 16x7 Offset 30

 

Ah ok. So as mentioned I've seen several lowered GE's on 15x7 +35 with no modifications needed (no rolling fenders). I'm lowered about 1.75"/45mm all around with 205/50/15 on 8" wheels and do not rub up front, but had to roll the rear fenders to avoid rubbing. Granted the 8" width adds 12mm over the 7" width. Would have cleared the 7" +35 most likely...not sure about the +30 though.

I did just read a few GK thread and seems that even people with +40 offset on a 7" wheel and lowered, will rub slightly up front. Maybe camber would help avoid that.

Safe to say +30 might require some modification to fit well.

 

Thanks
hard to find pictures of GK Fit with Offset 30