Stock Seats

Prelude Seats

Passenger side

Driver Side Underneath Connectors

Hey All! Im looking to install these 1999 Honda Prelude Seats into my Base Model 2007 Honda Fit. I noticed that there are a ton of connectors underneath the Honda Fit seats and im not sure what any of them do. I know that they’ll each have a connector for Driver (D) and Passenger (P) Seatbelt connector and for the side airbags.
With the Prelude Seats between both Seats only the D had 1 Connector for the Seatbelt, and none on the P side. If im swapping seats i know im going to swap the seatbelts so that connector will stay, but what do i do about all the rest? Can i just keep them unplugged or what?
And i know i need a bracket to install the prelude seats because i realized that the rails are very different on them.
Any help is very much appreciated, thanks!

 

That is NOT a swap worth doing for any reason. Start looking at newer Honda seats that are more in the era that your Fit is. Like from the Civic.

 

why? I like the comfortability of the prelude seats and they are in fantastic condition. Fit seats suck on longer distance drives, and as far as i know i don’t believe any other seats will just be plug and play, i dont really care about having to do fab work, just wanted knowledge on the connectors (and yes i do know my airbag light will be on with a swap)