2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

2011 Fit Sport (MT) Condenser Fan not working.

Thread Tools
 
Search this Thread
 
Old Aug 14, 2024 | 07:50 PM
  #1  
Senicova's Avatar
Thread Starter
|
New Member
Joined: Aug 2024
Posts: 7
From: Massillon, Ohio
2011 Fit Sport (MT) Condenser Fan not working.

I recently replaced my AC compressor which was bad since owning the vehicle used, refilled the coolant and all works as it should except the condenser cooling fan is not working.

I checked the relays and swapped it with the radiator fan relay and it still doesn’t work.. the radiator fan worked still so it’s not the relay.

I all ready purchased but haven’t received the whole fan assembly.. has anyone else had the fan motor blow out.. or is it some other problem potentially? I hope I didn’t buy the part and it still wont work.
 
Old Aug 15, 2024 | 07:18 PM
  #2  
Senicova's Avatar
Thread Starter
|
New Member
Joined: Aug 2024
Posts: 7
From: Massillon, Ohio
UPDATE. I put the new fan in and it still doesn’t work.

The resistors are fine, the fan is good.. still doesn’t run.

Now what are my options?
 
Old Aug 16, 2024 | 05:19 PM
  #3  
claycolvin's Avatar
Member
Joined: Feb 2018
Posts: 129
From: Palm Harbor, FL
5 Year Member
Fan problem

Check the wiring to the fan. The reading should be the same for both fans right? The two fans on the radiator are the only fans that I know of.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
uRabbit
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
6
Aug 15, 2024 08:36 PM
scarvalho
1st Generation (GD 01-08)
8
Oct 26, 2020 11:50 AM
Gerald Grimaldo Abellon
1st Generation (GD 01-08)
1
Jul 30, 2019 11:49 AM
mangosmoody
1st Generation (GD 01-08)
0
Jun 19, 2016 07:38 PM
fit4jdm
1st Generation (GD 01-08)
4
Oct 21, 2008 01:39 AM




All times are GMT -4. The time now is 03:50 PM.