Pictures of my new Fit
Re-size that beast! lol All you need is the program, "paint".
All you need to do to re-size (if your computer has "paint")
1) Right click on whatever pic you're wanting to resize and select, "Open with Paint."
2) Once your pic is open in Paint, go up to "Image" on the toolbar.
3) Image > Stretch/Skew
4) Under "stretch" there will be a "horizontal" and "vertical" box with a 0 in both, this is how you re-size the pics using Paint.
DON'T PUT ANYTHING IN THE BOTTOM SET OF BOXES WHICH ARE UNDER "SKEW."
5) Put the same percentage in each box....50% for both, for example if you're wanting to cut the size of your pic in half. If you get the pic down too small, go to "Edit" on the toolbar, then "Undo."
All you need to do to re-size (if your computer has "paint")
1) Right click on whatever pic you're wanting to resize and select, "Open with Paint."
2) Once your pic is open in Paint, go up to "Image" on the toolbar.
3) Image > Stretch/Skew
4) Under "stretch" there will be a "horizontal" and "vertical" box with a 0 in both, this is how you re-size the pics using Paint.
DON'T PUT ANYTHING IN THE BOTTOM SET OF BOXES WHICH ARE UNDER "SKEW."
5) Put the same percentage in each box....50% for both, for example if you're wanting to cut the size of your pic in half. If you get the pic down too small, go to "Edit" on the toolbar, then "Undo."
Vent Visors are sweet, the trim on the doors.....eh not so much, not crazy about them.
That rear bumper applique is nice on a darker color, but with my Fit being white, I think it would stand out waaaay too much. But I think it may help keep the car cleaner, or at least not show dirt as bad....water seems to tend to collect there on the rear bumper, it seems to get nasty about as quick as the front bumper/hood does.
That rear bumper applique is nice on a darker color, but with my Fit being white, I think it would stand out waaaay too much. But I think it may help keep the car cleaner, or at least not show dirt as bad....water seems to tend to collect there on the rear bumper, it seems to get nasty about as quick as the front bumper/hood does.
Thread Starter
|
Member
Joined: Oct 2008
Posts: 22
From: Parlin, New Jersey USA
As for the decal, I forgot to tell the dealer not to put it on. Now that it's there, I'll leave it there.
Thread
Thread Starter
Forum
Replies
Last Post
pwnstar
Fit DIY: Repair & Maintenance
5
Jul 6, 2008 08:37 PM
cojaro
General Fit Modifications Discussion
9
Oct 18, 2007 01:39 AM