New Bisimoto Products!!! GD3
Thread Starter
|
Member
Joined: Jun 2009
Posts: 106
From: Las Vegas, Nevada
New Bisimoto Products!!! GD3
Finally!
REAL POWER........from Bisimoto Engineering!
If any GD3 enthusiasts are or would be interested in seeking power gains please direct attention yo my Post under "Forced Induction" entitled the same as this.
Bisimoto Engineering has generously and kindly agreed to develop ultra high performance Cam and head gaskets for the GD3.
You don't need to waste your hard earned money on those silly intakes (no offense to anyone running those, they're not all defective), instead direct your attention to the link below:
Honda Insight N/A single cam 415hp
YouTube - Bisimoto Insight secret dyno test session: over 415whp
This is but one example how this engineering conquers single cam engine development and racing. Browse Bisimoto and watch some of the sick cars they develop!
If anyone is interested in what they are willing to offer us (after looking at the posts) please PM me confirming only what you are interested in.
REAL POWER........from Bisimoto Engineering!
If any GD3 enthusiasts are or would be interested in seeking power gains please direct attention yo my Post under "Forced Induction" entitled the same as this.
Bisimoto Engineering has generously and kindly agreed to develop ultra high performance Cam and head gaskets for the GD3.
You don't need to waste your hard earned money on those silly intakes (no offense to anyone running those, they're not all defective), instead direct your attention to the link below:
Honda Insight N/A single cam 415hp
YouTube - Bisimoto Insight secret dyno test session: over 415whp
This is but one example how this engineering conquers single cam engine development and racing. Browse Bisimoto and watch some of the sick cars they develop!
If anyone is interested in what they are willing to offer us (after looking at the posts) please PM me confirming only what you are interested in.
Member
Joined: Mar 2010
Posts: 90
From: spacetime
Finally!
REAL POWER........from Bisimoto Engineering!
If any GD3 enthusiasts are or would be interested in seeking power gains please direct attention yo my Post under "Forced Induction" entitled the same as this.
Bisimoto Engineering has generously and kindly agreed to develop ultra high performance Cam and head gaskets for the GD3.
You don't need to waste your hard earned money on those silly intakes (no offense to anyone running those, they're not all defective), instead direct your attention to the link below:
Honda Insight N/A single cam 415hp
YouTube - Bisimoto Insight secret dyno test session: over 415whp
This is but one example how this engineering conquers single cam engine development and racing. Browse Bisimoto and watch some of the sick cars they develop!
If anyone is interested in what they are willing to offer us (after looking at the posts) please PM me confirming only what you are interested in.
REAL POWER........from Bisimoto Engineering!
If any GD3 enthusiasts are or would be interested in seeking power gains please direct attention yo my Post under "Forced Induction" entitled the same as this.
Bisimoto Engineering has generously and kindly agreed to develop ultra high performance Cam and head gaskets for the GD3.
You don't need to waste your hard earned money on those silly intakes (no offense to anyone running those, they're not all defective), instead direct your attention to the link below:
Honda Insight N/A single cam 415hp
YouTube - Bisimoto Insight secret dyno test session: over 415whp
This is but one example how this engineering conquers single cam engine development and racing. Browse Bisimoto and watch some of the sick cars they develop!
If anyone is interested in what they are willing to offer us (after looking at the posts) please PM me confirming only what you are interested in.
need more details if you want more interest
need prices, dynos etc
if you think intakes are silly, i'm rotflmao thinking about cams WITHOUT dyno plots
Thread Starter
|
Member
Joined: Jun 2009
Posts: 106
From: Las Vegas, Nevada
I've left countless messages with Bisimoto....NO ONE RETURNS MY CALLS.....
I contacted the owner of Web Cams (Check them out), Laurie said that Hedi sometimes promises way more that she can do. I figured this would end up a waste of time. Unfortunately, we do nothing wrong, it's the other end of the deals that fall through. Laurie @ WebCam's said either one of them would entertain the possibility of the CAM projects for the 1.5, but she also said she's had to take some Bisimoto customers due to broken promises.
I contacted the owner of Web Cams (Check them out), Laurie said that Hedi sometimes promises way more that she can do. I figured this would end up a waste of time. Unfortunately, we do nothing wrong, it's the other end of the deals that fall through. Laurie @ WebCam's said either one of them would entertain the possibility of the CAM projects for the 1.5, but she also said she's had to take some Bisimoto customers due to broken promises.
Member
Joined: Apr 2010
Posts: 1,316
From: Minnesota
I just got off the phone with the technical department at Bisimoto...it will require a minimum of 30 willing buyers before they will guarantee production.
https://www.fitfreak.net/forums/fit-...isimoto-2.html
^Here is the sign up list. Put up or shut up....
https://www.fitfreak.net/forums/fit-...isimoto-2.html
^Here is the sign up list. Put up or shut up....
Last edited by blackndecker; Jul 23, 2010 at 08:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
