This is Ridiculous
#1
This is Ridiculous
So recently, I have purchased an 2009 SSM Honda Fit MT, and I am planning to lower it. I already bought Tanabe DF210's. However I have had some trouble finding a shop that would do it for me. In total I called 4 shops, and out of those four shops 2 asked why in the world would I lower my fit, and out of those four 1 shop just basically laughed at me and straight up hung up the phone, and one flat out said that they wouldn't do it.
As a paying customer, I am absolutely PISSED at how shops are treating me. So after looking for a shop, I basically have to ask the forums if anyone knows a shop in the bay area (preferably around the san jose/ milpitas area) that is reputable and would be willing to take my money and lower my goddang fit already!
As a paying customer, I am absolutely PISSED at how shops are treating me. So after looking for a shop, I basically have to ask the forums if anyone knows a shop in the bay area (preferably around the san jose/ milpitas area) that is reputable and would be willing to take my money and lower my goddang fit already!
#5
So recently, I have purchased an 2009 SSM Honda Fit MT, and I am planning to lower it. I already bought Tanabe DF210's. However I have had some trouble finding a shop that would do it for me. In total I called 4 shops, and out of those four shops 2 asked why in the world would I lower my fit, and out of those four 1 shop just basically laughed at me and straight up hung up the phone, and one flat out said that they wouldn't do it.
As a paying customer, I am absolutely PISSED at how shops are treating me. So after looking for a shop, I basically have to ask the forums if anyone knows a shop in the bay area (preferably around the san jose/ milpitas area) that is reputable and would be willing to take my money and lower my goddang fit already!
As a paying customer, I am absolutely PISSED at how shops are treating me. So after looking for a shop, I basically have to ask the forums if anyone knows a shop in the bay area (preferably around the san jose/ milpitas area) that is reputable and would be willing to take my money and lower my goddang fit already!
heres the thread i found, hope it helps you
#6
Unless you can find a shop that actually works on tuners you most likely will not find anyone in a "normal" run of the mill " car shop". They don't have a clue and that is why they will not help you out. I was lucky and found a shop that does all the normal stuff but had a few guys who work there that wrench on their own cars and were not worried when the installation instructions were all in Japanese. I am sure some Freaks from your area might be able to help you out but that is one modifcation that alot of people do on their own but if you can find some guys who know their way around a car they could help you out and get them installed.
Let us see your car when you get it dropped.
Cat :x
Let us see your car when you get it dropped.
Cat :x
#7
go to a tuner shop. But yeah dude seriously do it yourself. Find one of your Honda buddies to help you. The rears literally are 2 bolts, the upper mount and the lower, strut drops out, spring drops out. Replace spring with new, bolt strut back up. The fronts take maybe 30 minutes total if you don't BS and support the control arms
#9
Well since your in the Bay Area try out
Auto Innovations, LLC
1337 Minnis Circle
Milpitas , CA 95035
Ph.(408) 956-8004
Fax.(408) 956-8006
Website:www.autoinnovations.com
Tell them Jimmy (07 White Fit) sent ya. I never had issues with them.
EDIT: can you PM me the name of the shops that gave you issues...I need to know where to avoid
Auto Innovations, LLC
1337 Minnis Circle
Milpitas , CA 95035
Ph.(408) 956-8004
Fax.(408) 956-8006
Website:www.autoinnovations.com
Tell them Jimmy (07 White Fit) sent ya. I never had issues with them.
EDIT: can you PM me the name of the shops that gave you issues...I need to know where to avoid
#10
^+1 try Auto Innovations in milpitas.
They installed my Progress springs and then later Skunk2 Pro-C coilovers. Also does alignment which is recommended after lowering. Does great work at reasonable prices. Ask for Orlando.
They installed my Progress springs and then later Skunk2 Pro-C coilovers. Also does alignment which is recommended after lowering. Does great work at reasonable prices. Ask for Orlando.
Last edited by Evotech8; 06-28-2009 at 03:16 AM.
#11
Both Steve and Orlando are great guys, if they can't do, they often make recommendations to other shops.
#15
if you want to come down to SF go to this shop just call ahead for an appointment. That's where i got my coilovers done for a decent price.
http://www.vision-performance.com/
http://www.vision-performance.com/
#18
That is stupid how the shops acted! Do they not know that we will come on here and bash on them??
Honestly, suspension products are the only parts I wont "DIY" because the vehicle should be raised so the weight is distributed evenly and etc.
At least you got a couple recommendations and hope the leads work out for you!
BGS
Honestly, suspension products are the only parts I wont "DIY" because the vehicle should be raised so the weight is distributed evenly and etc.
At least you got a couple recommendations and hope the leads work out for you!
BGS
#19
Well since your in the Bay Area try out
Auto Innovations, LLC
1337 Minnis Circle
Milpitas , CA 95035
Ph.(408) 956-8004
Fax.(408) 956-8006
Website:www.autoinnovations.com
Tell them Jimmy (07 White Fit) sent ya. I never had issues with them.
EDIT: can you PM me the name of the shops that gave you issues...I need to know where to avoid
Auto Innovations, LLC
1337 Minnis Circle
Milpitas , CA 95035
Ph.(408) 956-8004
Fax.(408) 956-8006
Website:www.autoinnovations.com
Tell them Jimmy (07 White Fit) sent ya. I never had issues with them.
EDIT: can you PM me the name of the shops that gave you issues...I need to know where to avoid
Thread
Thread Starter
Forum
Replies
Last Post
Cliff
California - Bay Area Community
0
02-06-2013 03:26 PM
Santiad
2nd Generation (GE 08-13)
6
09-15-2011 07:35 PM