Guys,

I need some help here.
I want to take out all the door, to install some stuff.
Anyone kind enough to give details instruction and pictures would be greatly appreciated.
I noticed there is only 1 screw that I need to take out.

Help please.

Thanks

 

I havent' done it my self, but i'm assuming that you:

1) take off the door handle
2) use a panel remover, and pop out hte plastic clips all aroudn the door
3) lift the panel up carefully out of the window track
4) disconnect all electrical connections

and that's it. Like i said, i haven't done it myself, but i've done LOTS of othe rcars.

 

Thanks man,

but that's the thing. I need to know where are the clips and so on.
I'm afraid if I were to use excessive force, it will break the clips.

 

guard this link with your life!! It'll be the most useful website you have
Shop Manual (HONDA MOTOR Co.,Ltd.)

 

if only the link worked T_T

Was planning on working on replacing allt he speaker wires in the car. Just didn't like the stock shitty stuff...

 

you have to pop the armrest off first.. That takes a little bit of prying, but once that's off, a couple of screws, then the panel pops off the door via those little plastic clips. The hardest part is getting the arm rest off.

 

must be used with IE...

 

That one worked fine with FF.