Obdii/can scanner problem
Thread Starter
|
New Member
Joined: Dec 2009
Posts: 1
From: California
Obdii/can scanner problem
I got Eng check light on.
I just bought AUTEL Maxiscan MS409 OBD-II/CAN compliant.
Somehow, it does not make link. It shows status bar that stays low end and doesn't go up no matter how long wait.
When turned off the key, the bar goes up and it shows "ISO-9141-2, KWP2000, and "linkage error" Try again"
Strange thing is that when i borrowed other brand, it works fine, but the other well known brand. I belive both are CAN compliant too.
Is there way to solve this problem?
When i borrowed other scanner, code cameP0301 misfire on cyl 1.
I got 108K miles on it.
I changed plugs 8K miles ago, now I changed all Ign coils.
It still uneven.
What next? Fuel injection?
I just bought AUTEL Maxiscan MS409 OBD-II/CAN compliant.
Somehow, it does not make link. It shows status bar that stays low end and doesn't go up no matter how long wait.
When turned off the key, the bar goes up and it shows "ISO-9141-2, KWP2000, and "linkage error" Try again"
Strange thing is that when i borrowed other brand, it works fine, but the other well known brand. I belive both are CAN compliant too.
Is there way to solve this problem?
When i borrowed other scanner, code cameP0301 misfire on cyl 1.
I got 108K miles on it.
I changed plugs 8K miles ago, now I changed all Ign coils.
It still uneven.
What next? Fuel injection?
New Member
Joined: Nov 2009
Posts: 5
From: Illinois
Does this help?
Amazon.com: S. Mundle "Sonny"'s review of Autel MaxiScan MS300 CAN OBD-II Scan Tool
I don't have one but did read this comment by someone getting a link error with a Maxiscan and suggesting a work-around.
I don't have one but did read this comment by someone getting a link error with a Maxiscan and suggesting a work-around.
New Member
Joined: Sep 2009
Posts: 1
From: nsw
Hi ,my GS400 works fine with honda crv 2003 b
I.But not with HONDA JAZZ 2009.Could you let me know which scanner you use for this new Jazz?
I just bought AUTEL Maxiscan MS409 OBD-II/CAN compliant.
Somehow, it does not make link. It shows status bar that stays low end and doesn't go up no matter how long wait.
When turned off the key, the bar goes up and it shows "ISO-9141-2, KWP2000, and "linkage error" Try again"on
Strange thing is that when i borrowed other brand, it works fine, but the other well known brand. I belive both are CAN compliant too.
Is there way to solve this problem?
When i borrowed other scanner, code cameP0301 misfire on cyl 1.
I got 108K miles on it.
I changed plugs 8K miles ago, now I changed all Ign coils.
It still uneven.
What next? Fuel injection?
I just bought AUTEL Maxiscan MS409 OBD-II/CAN compliant.
Somehow, it does not make link. It shows status bar that stays low end and doesn't go up no matter how long wait.
When turned off the key, the bar goes up and it shows "ISO-9141-2, KWP2000, and "linkage error" Try again"on
Strange thing is that when i borrowed other brand, it works fine, but the other well known brand. I belive both are CAN compliant too.
Is there way to solve this problem?
When i borrowed other scanner, code cameP0301 misfire on cyl 1.
I got 108K miles on it.
I changed plugs 8K miles ago, now I changed all Ign coils.
It still uneven.
What next? Fuel injection?
Thread
Thread Starter
Forum
Replies
Last Post
Nussjohnathan@gmail.com
1st Generation (GD 01-08)
21
Nov 23, 2020 09:03 PM
kitenok
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
12
Dec 10, 2015 07:28 PM
CTCT
1st Generation (GD 01-08)
6
Nov 26, 2012 10:00 PM
