Fit DIY: Repair & Maintenance Threads discussing repairs and maintenance you can do yourself

Cruise control won't stay on

Thread Tools
 
Search this Thread
 
Old Oct 17, 2014 | 07:52 PM
  #1  
Mesa Mark's Avatar
Thread Starter
|
New Member
Joined: Oct 2014
Posts: 2
From: Mesa
Cruise control won't stay on

2007 Fit Sport. When I push my main cruise switch, the indicator light comes on but goes off when I let go of the switch. The fuses are good and I swapped relays around and everything stays the same.
Is the cruise switch a momentary switch or is it supposed to stay physically latched, in which case the switch may be bad? I tried holding the switch down while driving and trying to set the cruise speed but it wouldn't take. If it is the switch, where can I buy one and how to I access it in the steering wheel? I found a few threads about this with no answers. I found a thread to a Fit manual but links were dead or porn. Thanks.
 
Old Oct 17, 2014 | 08:00 PM
  #2  
DrewE's Avatar
Member
Joined: Aug 2012
Posts: 1,199
From: Vermont, USA
The cruise on/off switch is a latching switch—push it once to turn it on, push it again to turn it off. The set, resume, and cancel ones are momentary switches that spring back when you release them. If the main on/off switch isn't staying latched, that's probably your problem.

You could presumably buy a new one from any dealer or e.g. bernardiparts.com, but it might be cheaper to get one from a junk yard if you're so inclined. I don't know how to go about swapping it out; I suspect it would involve removing the steering wheel, which is not the simplest task in the world and involves removing the airbag unit. Make sure you understand how to do that part safely before attempting it; an airbag exploding in your face would make for a very bad (and expensive) day.

I think I recall someone else here having the same problem with the switch...don't remember who, but perhaps some searching could uncover the thread.
 
Old Oct 17, 2014 | 08:28 PM
  #3  
jmsplitfyre's Avatar
Member
iTrader: (5)
Joined: Aug 2011
Posts: 912
From: Edmonton, AB
5 Year Member
Part 36770-SLN-A01 $59.74 at Bernardi Parts

The spring inside the switch is probably worn out. I'd sell you my steering wheel, but my QR set-up isn't complete yet.
 
Old Oct 20, 2014 | 03:01 PM
  #4  
Mesa Mark's Avatar
Thread Starter
|
New Member
Joined: Oct 2014
Posts: 2
From: Mesa
I experimented,while driving yesterday, by holding the cruise button down and then hit the set button and the cruise control took over, so that told me that the switch was not mechanically latching. Odd that it would fail, as I hardly ever use it. I am going to try and glue it in the depressed position and that will solve my problem till I can track down a new switch and someone to deal with the airbag. Thanks for the website address.
 
Old May 20, 2023 | 08:29 PM
  #5  
Zardiw's Avatar
Member
Joined: Jul 2014
Posts: 211
From: Palm Springs, Kalifornikate
5 Year Member
Have the same problem..........it's always been on so the switch gets very minimal usage........

And getting a used one from a junk yard is a LUNATIC IDEA..........lol.........What are people thinking nowadays anyway.....lolol........

Z

 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BobinMO
Fit DIY: Repair & Maintenance
2
May 20, 2023 08:24 PM
CuTeBoi
Fit DIY: Repair & Maintenance
3
Jun 19, 2016 02:50 PM
allTRACway
2nd Generation GE8 Specific Fit I.C.E. Sub-Forum
3
Mar 3, 2016 10:10 PM
ritholtz
3rd Generation (2015+)
1
Feb 4, 2015 09:16 PM
Ted Leja
Other Car Related Discussions
0
May 4, 2005 11:16 AM




All times are GMT -4. The time now is 02:55 AM.