anyone how to install Apexi SAFC NEO
I not take the instruccion
Member
Joined: Aug 2006
Posts: 151
From: Oklahoma
Its not very hard, it has several wires, each goes to a specific wire on the ECU wires, TPS, Vtec, Power, Ground, MAP, and a few others. Some of them you just tap into, some you just cut.
Heres the Install Manual
Heres the Wiring Manual
Heres the Install Manual
Heres the Wiring Manual
Member
Joined: May 2006
Posts: 280
From: ga
be sure to follow the instructions closely . the 2 power and 2 ground wires need to be a certain distance from each other and a certain distance from the ECU. sounds weird but those things have a tendency to be buggy if they arent installed just right. also solder it in and ditch the crimps.
Frequent FitFreak Poster
Joined: May 2006
Posts: 619
From: Houston
Not really worth it. Just for looks and monitoring i guess. But definitely not for tuning purposes on a non-boosted Fit. Hondata has already concluded that the Fit is very well-tuned from the factory, even with bolt-ons.
Plus, newer Honda's are less tolerant to piggyback tuning.
Plus, newer Honda's are less tolerant to piggyback tuning.
Member
Joined: Dec 2006
Posts: 68
From: phoenix,az,usa
the air/fuel ratio is really already very efficient in this car with mods , this one yes, will help you monitor your engine, but no, will not add any ponies
really if you want the most out of your i/h/e/ pulley , just get a good ground wiring set, make sure you have nice spark plugs, change your oil regularly, i read that hondata thing too, hoda made this ship, "air tight"
sorry. had to get that last bit in.
good luck with your mod though
really if you want the most out of your i/h/e/ pulley , just get a good ground wiring set, make sure you have nice spark plugs, change your oil regularly, i read that hondata thing too, hoda made this ship, "air tight"
sorry. had to get that last bit in.
good luck with your mod though
the air/fuel ratio is really already very efficient in this car with mods , this one yes, will help you monitor your engine, but no, will not add any ponies
really if you want the most out of your i/h/e/ pulley , just get a good ground wiring set, make sure you have nice spark plugs, change your oil regularly, i read that hondata thing too, hoda made this ship, "air tight"
sorry. had to get that last bit in.
good luck with your mod though
really if you want the most out of your i/h/e/ pulley , just get a good ground wiring set, make sure you have nice spark plugs, change your oil regularly, i read that hondata thing too, hoda made this ship, "air tight"
sorry. had to get that last bit in.
good luck with your mod though
not true, was never proven that it wouldn't, and now it is proven on shipon, about 6.4 whp with the neo and the ecu pin out for it, the right pin out
Member
Joined: Jul 2005
Posts: 695
From: RGL M.E.
ok... now im alittle confused.
i heard dat the Neo apexi would be able to squeeze out some more hps out of watever mods we have bolted on, then i hear it wont add anything but rather to get Emanage ultimate instead cos its definately gonna pull out some ponies out of our cars.
so now ... Siphon says it managed to squeeze out 6+whps.
so is it possible dat whp can be achieved via Apexi Neo.
reason im askin cos im really interested in the Neo its hell alot cheaper than Ultimate Emanage but i hear Neo is only for monitoring cos "Honda made this ship 'air tight'"
i heard dat the Neo apexi would be able to squeeze out some more hps out of watever mods we have bolted on, then i hear it wont add anything but rather to get Emanage ultimate instead cos its definately gonna pull out some ponies out of our cars.
so now ... Siphon says it managed to squeeze out 6+whps.
so is it possible dat whp can be achieved via Apexi Neo.
reason im askin cos im really interested in the Neo its hell alot cheaper than Ultimate Emanage but i hear Neo is only for monitoring cos "Honda made this ship 'air tight'"
Last edited by azkikersfit; Jul 17, 2007 at 07:38 PM.
ok... now im alittle confused.
i heard dat the Neo apexi would be able to out some more hps out of watever mods we have bolted on, then i hear it wont add anything.
Then some one tells me to get Emanage ultimate instead cos its definately gonna pull out some ponies out of our cars.
so now ... Siphon says it managed to squeeze out 6+whps.
so is it possible dat whp can be achieved via Apexi Neo.
reason im askin cos im really interested in the Neo but i hear its only for monitoring cos "Honda made this ship 'air tight'"
and its cheaper than Ultimate Emanage
i heard dat the Neo apexi would be able to out some more hps out of watever mods we have bolted on, then i hear it wont add anything.
Then some one tells me to get Emanage ultimate instead cos its definately gonna pull out some ponies out of our cars.
so now ... Siphon says it managed to squeeze out 6+whps.
so is it possible dat whp can be achieved via Apexi Neo.
reason im askin cos im really interested in the Neo but i hear its only for monitoring cos "Honda made this ship 'air tight'"
and its cheaper than Ultimate Emanage
welll dyno sheet proved it??? I have it on my car now, and gonna see what I can squeeze out of mine? just have to install it correctly
Member
Joined: Jul 2005
Posts: 695
From: RGL M.E.
unfortunately siphon comes late here in the middle east.
but i m sure it has squeezed some HPs with proper tuning and i m really hopin its gonna squeeze out some out of my ride.
let me know how it goes or if any difference in performance
but i m sure it has squeezed some HPs with proper tuning and i m really hopin its gonna squeeze out some out of my ride.
let me know how it goes or if any difference in performance
I have mine where my aux jack is