Quang's turbo build CHU!!!
8 Attachment(s)
Alright little ladies and little girls, after my ghetto rigging my first setup together and having the turbo go out after the first week without even going into boost, i got lazy to finish things up right... so since i have a couple of weeks off of school now i might as well finish things up...
here are some pics of my progress: Attachment 70609 Attachment 70610 Attachment 70611 my new turbo t3 ar .48/.42 http://i16.photobucket.com/albums/b3...8/P1010079.jpg old turbo and new turbo Attachment 70612 Attachment 70613 Charge piping pretty much done an intercooler is on Attachment 70614 How i did the IAT sensor Attachment 70615 Piece of cloth for makeshift air filter lol Attachment 70616 BOV installed |
7 Attachment(s)
Attachment 70602
AEM F/IC installed and shoved into the glove box, i need to mount it for good though... Attachment 70603 OK new materials for new manifold and downpipe :) Attachment 70604 box of misc stuff #1 Attachment 70605 Box of misc. #2 Attachment 70606 Stock injectors anyone?? Attachment 70607 Just for kicks the OLD manifold and downpipe lol Dont hate! Attachment 70608 Oh YEAH!! kids snort coke like me and you can solve this!!!! well thats pretty much what i have for now... actually i have a few more misc stuff that i didnt take pics of but oh well maybe next time. ill try to rush things and finish within 2 weeks or so maybe 3 or 4 if i get lazy. ill post more when there's progress, i hope that this thread will be my motivation to get things done. alright time to go watch some porn... later! |
hahha nice thread. and kickin' air filter!
|
hahaha it's super dirty too
|
nice thread.
what happened to your first build? what did you do half assed that caused it to fail? what hoses are you tapping into to get the vacuum source for the BOV and your boost gauge? btw, im using a turbo thats very similar to taht and i cant get the damn exhaust side free from the center to clock it properly. ive tried wd40, pb blaster (let ti souck for about 15 hours) and a blow torch...nothing has worked. any ideas? the oil return fitting is about 45* away from sitting vertical and im afraid that since its gravity fed it wont drain properly like that.... |
tagged =]......
|
Originally Posted by NIGHTHAWKSI
(Post 539058)
nice thread.
what happened to your first build? what did you do half assed that caused it to fail? what hoses are you tapping into to get the vacuum source for the BOV and your boost gauge? btw, im using a turbo thats very similar to taht and i cant get the damn exhaust side free from the center to clock it properly. ive tried wd40, pb blaster (let ti souck for about 15 hours) and a blow torch...nothing has worked. any ideas? the oil return fitting is about 45* away from sitting vertical and im afraid that since its gravity fed it wont drain properly like that.... been telling ya. get a gangsta brass hammer(2lb or bigger) then call it all kinds of dirty names and beat the crap out of it. just watch the toes. lol |
Originally Posted by NIGHTHAWKSI
(Post 539058)
nice thread.
what happened to your first build? what did you do half assed that caused it to fail? what hoses are you tapping into to get the vacuum source for the BOV and your boost gauge? btw, im using a turbo thats very similar to taht and i cant get the damn exhaust side free from the center to clock it properly. ive tried wd40, pb blaster (let ti souck for about 15 hours) and a blow torch...nothing has worked. any ideas? the oil return fitting is about 45* away from sitting vertical and im afraid that since its gravity fed it wont drain properly like that.... the turbo just went out on my first setup, it was an old turbo that i knew was gonna fail anyways, plus my oil drain set up didnt help it any. i need to drill and tap it this time. I just rushed to get things done so, i wasnt happy on how things looked, im a bit of a perfectionist haha |
Originally Posted by quangalang
(Post 539289)
yeah get a nice hammer and pound it off!!!!
the turbo just went out on my first setup, it was an old turbo that i knew was gonna fail anyways, plus my oil drain set up didnt help it any. i need to drill and tap it this time. I just rushed to get things done so, i wasnt happy on how things looked, im a bit of a perfectionist haha what do you mean drill and tap it this time? how was it before? you driving the car with the fmic on it? thats gotta murder performance. |
dont drill and tap your oil pan. do what i did. weld a male -10AN fitting on the pan and run a braided line for your oil return.
|
looks awesome.
|
Originally Posted by underdog
(Post 539330)
what do you mean drill and tap it this time? how was it before?
you driving the car with the fmic on it? thats gotta murder performance. haha i haven't gone full throttle for so long so i wouldnt know if it's slow or not...
Originally Posted by kelsodeez
(Post 539341)
dont drill and tap your oil pan. do what i did. weld a male -10AN fitting on the pan and run a braided line for your oil return.
drilling and tapping would work just as well though, it shouldnt be a problem, and it's something i can do on my own |
it was 10 bucks for the bung, 25 to get it welded on and i never ever have to worry about it again. its worth it.
|
Originally Posted by kelsodeez
(Post 539504)
it was 10 bucks for the bung, 25 to get it welded on and i never ever have to worry about it again. its worth it.
lol well im still keeping my options open, im gonna finish up the manifold and down pipe first. |
5 Attachment(s)
Wednesday!! wednesday!!
i didnt get any fab work done today because im at my ma and pa's house. i did manage to pick up 2 items though: Attachment 70556 Attachment 70557 harbor freight flux core welder!! it was only like 100 bucks. Attachment 70558 and it welds alright, i took an angle grider with a wire wheel on it and cleaned it up after i took this pic and all the slag came off and it looks just like any other clean weld. this should help with finishing up my downpipe and the rest of my charge pipes. overall im content with it :) Attachment 70559 and this sucker! to tap my oil pan haha Attachment 70560 and do you guys like my track bike? :) |
i'm to lazy to metal finish anymore. lol have fun with that. nice updates. I will admit I almost started building my manifold last night. lol but not sure I want a log. almost tempted to get crazy to do a sidemount mani. but I'm definitly to lazy for that. to much relocating.
|
Originally Posted by underdog
(Post 540185)
i'm to lazy to metal finish anymore. lol have fun with that. nice updates. I will admit I almost started building my manifold last night. lol but not sure I want a log. almost tempted to get crazy to do a sidemount mani. but I'm definitly to lazy for that. to much relocating.
As for you, you should make a tubular topmount, it shouldnt be too hard for you since you are a way better fabricator than i am. im just gonna stick to the log for simplicity. do something like this: http://www.synapseturbo.com/gallery/...d2ec6b_800.jpg |
nasty build
|
i've built one very similar to that in the past, but i'm not sure if we have the clearance for something like that. the firewall clearance gets pretty tight towards the top.
|
Originally Posted by underdog
(Post 540419)
i've built one very similar to that in the past, but i'm not sure if we have the clearance for something like that. the firewall clearance gets pretty tight towards the top.
|
All times are GMT -4. The time now is 03:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands