Turbo manifold for l15?
Thread Starter
|
Member
Joined: Oct 2006
Posts: 281
From: puerto rico
Turbo manifold for l15?
hey guys i want to know if there are any company or person that made a turbo manifold or turbo header for the L15 and sell it separately from any kit... thanks in advance .....
take care guys!!
att: juanpo...
take care guys!!
att: juanpo...
you can try contacting either hks or ajracing and see if they will sell the manifold seperatly from the turbo kit.
i am currently in the process of building my own.
depending if you can weld or if you can get the manifold from hks or ajracing, you might want to consider getting the head flange from weirtech and bringing it to a shop and have them make you a manifold.
i am currently in the process of building my own.
depending if you can weld or if you can get the manifold from hks or ajracing, you might want to consider getting the head flange from weirtech and bringing it to a shop and have them make you a manifold.
Member
Joined: Dec 2007
Posts: 50
From: Ontario
I tried calling ajracing, and they where a no, wondering if you had better luck with hks. I did build my own, log as not much else will fit, but some of the welds are relay difficult to get at, hence exhaust leaks. Hoping to build a version two soon with no leaks.
you can get pre made ones from asia
Do you know chinese ?
i have a couple of places you can call..but they don't speak english
and one you get from china is almost the same as the AJR one..
if you want ... i'll give you contact info of the china shop
i have a couple of places you can call..but they don't speak english
and one you get from china is almost the same as the AJR one..
if you want ... i'll give you contact info of the china shop
just post it up. i dont speak any of that haha.
im sure someone does on here and can call or something.
dont see why AJR or someone else doesnt import them and sell them
or make there own to sell individually
im sure someone does on here and can call or something.
dont see why AJR or someone else doesnt import them and sell them
or make there own to sell individually
Member
Joined: Sep 2007
Posts: 179
From: Edmonton
this might be a really bad idea, but has anyone ever thought of "customizing" like a T1R or WeaponR street header to bolt up to a turbo?
I have a shop somewhat close by that likes to do custom turbos, but ive only seen two of them and both of them the turbo was mounted more on the tail pipe than the header.
I have a shop somewhat close by that likes to do custom turbos, but ive only seen two of them and both of them the turbo was mounted more on the tail pipe than the header.
Member
Joined: Dec 2007
Posts: 50
From: Ontario
Most of these companies (AJ/HKS) do use Chinese to manufacture the manifolds, good chance that this is the same one that one of those company's use.
The rear mount turbo isn't the worst idea, but then you have to run oil and charge-piping back, witch may be a more difficult problem then building/finding a manifold.
Bump to that, post the link, I have a friend that's going to be in hong Kong in a few weeks, I believe she speaks some Chinese.
Most of these companies (AJ/HKS) do use Chinese to manufacture the manifolds, good chance that this is the same one that one of those company's use.
The rear mount turbo isn't the worst idea, but then you have to run oil and charge-piping back, witch may be a more difficult problem then building/finding a manifold.
Most of these companies (AJ/HKS) do use Chinese to manufacture the manifolds, good chance that this is the same one that one of those company's use.
The rear mount turbo isn't the worst idea, but then you have to run oil and charge-piping back, witch may be a more difficult problem then building/finding a manifold.
it can be done!!! it would sound sick as hell too
Member
Joined: May 2009
Posts: 83
From: Oversea
all this my custom made. U want?
New Member
Joined: Oct 2018
Posts: 15
From: athens georgia usa
New Member
Joined: Oct 2018
Posts: 15
From: athens georgia usa