Just picked up ASPEC CAT DELTE... Need installer...
#1
Join Date: Aug 2008
Location: Los Angeles/Highland Park
Posts: 244
Help with ASPEC CAT DELTE...
I live around Pasadena, Glendale, San Gabriel, Alhambra...
If you can do the install, please let me know and how much...
Or HELP with advice:
How do i get a wrench in from the bottom to loosen the bolts
that connect the cat-delete to the headers? Because it is a
small place to work in...
Some info...
Car is dropped on DF210's so maybe a little hard to get under the car...
Thanks...
If you can do the install, please let me know and how much...
Or HELP with advice:
How do i get a wrench in from the bottom to loosen the bolts
that connect the cat-delete to the headers? Because it is a
small place to work in...
Some info...
Car is dropped on DF210's so maybe a little hard to get under the car...
Thanks...
Last edited by setter11; 07-19-2009 at 06:39 PM.
#5
we do have inspections but for new cars i think we don't have to get tested for like 3-4 years and every two years after.
#6
Join Date: Aug 2008
Location: Los Angeles/Highland Park
Posts: 244
I cant break the bolts, those bastards are on there good!!! Lol
and i can get to them, but once again having trouble breaking them
and getting my ratchet in the space....
exactly...
#7
Soak in PB Blaster, then use something for leverage like a breaker bar. I think I used a vacuum cleaner extension tube around my ratchet haha.
#9
I can do it at my house. It's easy u gotta get under the car and get the car jacked up all the way. When i installed jamesbizzles cat delete, i was WAY under the car. Took 25 minutes after that. It's all about having the right tools and extensions. =]
#10
Join Date: Aug 2008
Location: Los Angeles/Highland Park
Posts: 244
Yeah, so lets say i had to throw that cat back on and i went to smog i wouldn't pass???
yea im lacking the stuff you need...
Last edited by setter11; 07-21-2009 at 08:02 PM.
#14
Join Date: Aug 2008
Location: Los Angeles/Highland Park
Posts: 244
Sooo Mr. Baller, where do you go? Haha..
Whats the penalty for having a test pipe in the even i ever get pulled over and checked? I was thinking of just puttin the heat shielding around the test pipe to make it look like one is on there...
#15
Seems to be somewhere around $1500 penalty from CA, possible fines up to $2500 from the Federal government, as well as getting your car impounded.
Last edited by Koi; 07-24-2009 at 07:44 PM.
#16
Join Date: Aug 2008
Location: Los Angeles/Highland Park
Posts: 244
I'm not sure about the specifics but from what I've heard, could be thousand(s) of dollars in fines, or even getting the car impounded.
Seems to be somewhere around $1500 penalty from CA, possible fines up to $2500 from the Federal government, as well as getting your car impounded.
Seems to be somewhere around $1500 penalty from CA, possible fines up to $2500 from the Federal government, as well as getting your car impounded.
geez!!! thanks...
is it worth the couple HP gain? lol
NOT!!!
Thread
Thread Starter
Forum
Replies
Last Post