anyone installed a map light?
#3
https://www.fitfreak.net/forums/fit-...ighlight=light
I didn't do a DIY because it really isn't simple. The cutout is a very odd shape and I had to fabricate my own mounting hardware.
There is another thread discussing a rectangular Honda map light that essentially pushes into place. That one has no DIY either but would be a whole lot easier to figure out on your own.
I didn't do a DIY because it really isn't simple. The cutout is a very odd shape and I had to fabricate my own mounting hardware.
There is another thread discussing a rectangular Honda map light that essentially pushes into place. That one has no DIY either but would be a whole lot easier to figure out on your own.
#5
yes there is a diy.. check my newbs section Ken's Fit Blog. it's near
the end of that thread.
i was inspired by wdb's install. just follow his thread and i
linked my diy page.
#6
#7
dam some of you guys need to come and help me out id be scared to do this just like im scared to crack open my lights. none of the DIY's say where exactly to cut the head liner i mean yea i see the pic but like how many inches from the plate for the mirror? stuff like that.
#9
I made a template out of light cardboard and moved it around until I found the place I wanted. Then I taped it down, pulled out the knife, and started cutting...
...after I thought about it for a minute or two.
Yeah, it's nerve-wracking. But if you do the measure twice / cut once thing, and you know it's what you want and where you want it, there's really no choice but to stab that sucker.
...after I thought about it for a minute or two.
Yeah, it's nerve-wracking. But if you do the measure twice / cut once thing, and you know it's what you want and where you want it, there's really no choice but to stab that sucker.
Thread
Thread Starter
Forum
Replies
Last Post
Swangger
Fit Interior & Exterior Illumination
0
11-21-2012 02:44 AM
heinzmoleman
Fit Interior & Exterior Illumination
1
04-01-2012 03:48 PM
Benggolf
Greater Vancouver BC Community
17
08-05-2009 01:23 AM