Im going to be using a Personal grinta 330MM wheel, now what else do i need to get that would work?

 

What you need to make it work

1. momo hub adapter
2. momo-nardi ring adapter

Thats just for a permanent wheel if you want quick release you will need

1. NRG Short Hub Adapter
2. NRG Quick release and you can add a NRG lock if you want

 

Im going with quick release, I would also like the wheel closer to me, I dont know what makes a fit weird to drive but when my arms are at the right lengths my legs are cramped, Should i consider a med hub?

 

you can slap the momo hub adapter /w a larger nrg quick release

 

yah, they sell spacers too 15mm, 20mm, 25mm, 30mm, and so on.

but remember that your hand will get farther and father away from the turn signal stalk, and your whole body farther away from the shift knob. it's best not to over do it.

 

Is it possible to adapt a spacer to a stock steering wheel with an adapter/ spacer?..... It seems like it would be possible to me with help from a machine shop but does anyone have knowledge of it having been done?