|
Some US company.
Here are all my blue interiors https://www.fitfreak.net/forums/fit-...iny-again.html A bit brighter but waaaaaaay more cool. |
Originally Posted by Black3sr
(Post 718026)
I assume the very first fuse box pic is from a GD. Anyone point out the spots to wire a GE? I am just looking for the simple lights on when door open thing. Thanks.
|
1 Attachment(s)
Originally Posted by DSC
(Post 965175)
Is it the same? I am trying to do the same... hook up LED's to work with the dome light.
It is the plug with blue and pink wires. One wire to each. Attachment 38311 http://s90.photobucket.com/albums/k2...urrent=003.jpg |
Originally Posted by Black3sr
(Post 965387)
Here is the GE8 box
It is the plug with blue and pink wires. One wire to each. http://s90.photobucket.com/albums/k2...urrent=003.jpg |
thanks for the wiring on this -- its all i needed to get started on my additional lighting -
The plug in the lower left corner of the switch is an always on power. For JUST adding lights to work with the dome light, this is an easy spot to plug in. Power on bottom left, Ground on top right. However, it's the ground on the top right that is switched on and off, that's the important one. |
Anyone know the load limit for the GE dome light circuit?
I have door sill LEDs already attached in parallel and want to add some small strips in my door handles. The strips are 4.5ma each, think it'll be a problem to install 4-8 of them? Keeping in mind what I already have installed. |
i did mine today. i used led strip. thanks for the manual.
https://imageshack.us/a/img547/117/10k0.jpg https://imageshack.us/a/img837/4837/1m7q.jpg |
3 Attachment(s)
Originally Posted by Black3sr
(Post 965387)
Here is the GE8 box
It is the plug with blue and pink wires. One wire to each. Attachment 38311 http://s90.photobucket.com/albums/k2...urrent=003.jpg Pics: Attachment 89508 Attachment 89509 Attachment 89510 The wiring harness took 1.5 hours and the install another 1.5 hours. I used the convoluted tubing under the dash and under both front seats. I tucked the wires into the console by removing the 2 front screws and removing the rear screws. Once tucked under the console, tightened up the screws and everything is quite tidy and out of sight except for where it sneaks out briefly to the convoluted tubing. Pretty much same install as my 2015 Fit here: |
Looks great! Looking forward to doing this with my GK.
|
Help vios dome light wiring
Originally Posted by Lex_Dymndz
(Post 375455)
well, since my GF lets me mod her Fit (she just doesn't want me to get crazy) I decided to do the footwell lighting.
It was a PIA. I was not able to get my 14 gauge jumper wires to stick. So I just stuck in the 10 gauge wires from my LED strips (Pilot 10" LED strips from Pep Boys/ $19.99 each). I ran the wires underneather the paneling. So you cant see it. It came out pretty good. But took me longer than I expected. Here's the pics: https://i7.photobucket.com/albums/y2...tLights002.jpg Attachment 79108 BIG THANKS to jlor for the DIY info. https://cimg3.ibsrv.net/gimg/www.fit...c768cded60.jpg https://cimg4.ibsrv.net/gimg/www.fit...a42e973f43.jpg |
| All times are GMT -4. The time now is 08:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands