How to change the foglight's bulbs?
#2
on the side of the foglight housings, there's a 10mm bolt with a phillips head on it. Use either a 10mm socket/wrench or a phillips screw driver to remove it. Then tip the foglight housing outs. disconnect the wires and you're good. Twist the bulb counterclockwise to unlock the bulb.
#3
on the side of the foglight housings, there's a 10mm bolt with a phillips head on it. Use either a 10mm socket/wrench or a phillips screw driver to remove it. Then tip the foglight housing outs. disconnect the wires and you're good. Twist the bulb counterclockwise to unlock the bulb.
Tyler
Thread
Thread Starter
Forum
Replies
Last Post
Deivioncrx
Fit Interior & Exterior Illumination
5
01-08-2007 03:48 PM