Smoked LED Tails on ebay
#1
Smoked LED Tails on ebay
just saw these on ebay, wondering if anyone knows if they're any good?
eBay Motors: 2009 2010 HONDA FIT JAZZ GE8 GE SMOKED LED TAIL LIGHTS (item 350186266585 end time May-02-09 16:59:37 PDT)
eBay Motors: 2009 2010 HONDA FIT JAZZ GE8 GE SMOKED LED TAIL LIGHTS (item 350186266585 end time May-02-09 16:59:37 PDT)
#3
I bought from this vendor Clear LED for my GE8 Honda Fit
I bought these last week and installed them yesterday (Clear ones, not smoked, otherwise the same ).
Fitment was pretty good, a little bit of a gap but that can probably be fixed easily, there is another thread on FitFreak forums about optimizing fitment by cutting off some unecessary plastic protruding bits. Also I plan on using Permatex silicon adhesive RTV glue to seal it watertight and prevent any leaks / rust.
The Red Brake light harness fits properly.
The Turn signal also plugs in properly.
Unfortunately, the reverse backup light socket (the hole) is too big for the STOCK rear turn socket connector / bulb.
Included in the package was another pair of cables that will fit the larger sized hole. So I plan on soldering / splicing this to the exisitng reverse back-up light cable and using a larger sized bulb (actually LED tower style bulb).
Anyway I am happy overall with the appearance and ease of installation. Just a tad disappointed with the improper hole size for white backup reverse lights. But I think that can be easily remedied as I described.
Hope this helps...
Fitment was pretty good, a little bit of a gap but that can probably be fixed easily, there is another thread on FitFreak forums about optimizing fitment by cutting off some unecessary plastic protruding bits. Also I plan on using Permatex silicon adhesive RTV glue to seal it watertight and prevent any leaks / rust.
The Red Brake light harness fits properly.
The Turn signal also plugs in properly.
Unfortunately, the reverse backup light socket (the hole) is too big for the STOCK rear turn socket connector / bulb.
Included in the package was another pair of cables that will fit the larger sized hole. So I plan on soldering / splicing this to the exisitng reverse back-up light cable and using a larger sized bulb (actually LED tower style bulb).
Anyway I am happy overall with the appearance and ease of installation. Just a tad disappointed with the improper hole size for white backup reverse lights. But I think that can be easily remedied as I described.
Hope this helps...
#4
I've been eyeing these for about a month now. Just can't pull the trigger. Sent a question to the seller about plug and play and never heard back. The above post answers my question though. Bethesdaguy2009, do you think you can post some images of them installed on the vehicle for me so I can make my decision to purchase or wait for something else?
Thread
Thread Starter
Forum
Replies
Last Post
Stormtrooper
2nd Generation (GE 08-13)
23
06-13-2009 02:28 AM
Rod2Rice
Fit Interior & Exterior Illumination
3
05-08-2008 08:49 AM