This one then ?
https://m.ebay.com/itm/Honda-FIT-Mys...d=461766518885.
Originally Posted by USDM
(Post 1396667)
That looks like Mystic Yellow Pearl.
|
Originally Posted by Sue88
(Post 1396668)
This one then ?
https://m.ebay.com/itm/Honda-FIT-Mys...d=461766518885. For your reference, I've circled my paint code in red in the image below: https://cimg1.ibsrv.net/gimg/www.fit...66241ac218.jpg |
My car's from Japan. I don't think there's the colour code. But i will check it.
|
Originally Posted by Sue88
(Post 1396738)
My car's from Japan. I don't think there's the colour code. But i will check it.
|
Originally Posted by USDM
(Post 1396681)
You can make sure by opening your driver's door and checking the paint code.
For your reference, I've circled my paint code in red in the image below: https://cimg1.ibsrv.net/gimg/www.fit...66241ac218.jpg |
Originally Posted by Sue88
(Post 1396744)
Do i need to remove something from the door to see it? Cause i'm afraid of breaking something if i have to remove anything from the door :ohnoes:
|
Originally Posted by USDM
(Post 1396745)
No, you do not. You'll see what I'm talking about as soon as you open your driver's door.
|
I have bought the Honda FIT Mystic Yellow Pearl Y72P Touch Up Paint on ebay. I would like to know if i can apply it directly on my car without any base coat. Thank you in anticipation.
|
I touched up some small chips. Directions said clean with alcohol, wait 30 minutes, paint, wait 30 minutes, clear coat.
|
Originally Posted by wmo168
(Post 1395177)
I just install a kit from Amazon and it cost $36.00 Easy install amazing.. you just have to make sure it oriented correctly. Amazon Link https://cimg8.ibsrv.net/gimg/www.fit...5c03b25ae.jpeg https://cimg0.ibsrv.net/gimg/www.fit...ec85bf37e.jpeg |
MIZIKE,
I don't see an h4/hb2 on the amazon link you provided? |
I didnt provide the link...that was another member.
But I did try to buy from Amazon and they were sold out of the H4. They said they'll have it in 3 or 4 days. I bought the fan LEDs from Beamtech and just got it installed (got it off eBay). Sort of a PIA if you have large hands. And you'll need to invert the existing dust caps to make it fit (which is extremely clever of Honda to provide). Otherwise, it looks great and theres no noise coming from the fan. |
I am leery of plopping LED bulbs into reflector housings designed for halogen bulbs. :-(
Is there anything in the GK5 world that is a whole replacement assembly, a complete kit designed for either Bi-Xenon HID or LED? In 2002, when I had a Honda EP3 Si for a daily driver, we sourced some German headlight assemblies with Bi-Xenon HID, and it helped tremendously, and everything worked perfectly without having to worry about glare or beam adjustment or anything else. |
All times are GMT -4. The time now is 10:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands