still having a problem with the "refresh" seating position.

thanks,

 

dont got a video, but here is how you do it.

take off front seat head rest.
pull rear seat release (as if you are lowering the seat)
push the back of the seat to a slight recline. (opposite of folding down)
take desired front seat and slide it all the way forward (further than the last locking position.)
fold seat all the way back, there is no gap, it fits pretty tight.

 

don't for get to recline the rear seats ALL the way by pulling the latch (same latch that folds them down),

 

i will have to give it another try.

first time i tried it, the front passenger seat bumped into the rear seat cushion by about 2 or 3 inches. Also, i did not get the rear seats to "recline"; i believe i gave it a try but they did not immediately recline so i skipped that step. the manual says to move the front seat forward using the latch high on the front seat backs; is that more proper to do than using the latch underneath the front seats?

thanks,

p.s. this car rocks!

 

You have to make sure the front seat is slid all the way forward. When youre reclining the front down to the rear seats the front seat will slide back a bit. Just slide it forward while pushing down.