Well i contacted a fab shop to see about getting a custom harness bar and this is what i was told: "The easiest and cheapest way to go about this is to buy a harness bar from a similar car and then we could just do some minor fab work to make it Fit." So now my question is...Out of all the harness bars Sparco makes(92-00 Civic, 97-01 Prelude, and Integra 94-01) which one of the three would most likely be the best choice?

 

you may want to post this in the auto-x section of fitfreak.net the members there would be more inclined for this sort of topic.

 

you would want to take some measurements from side to side of the car and see which one is closest to the ones sparco lists.

 

Logical & practical = good suggestion.

 

i think we are in the same trade. its not rocket science. it metal fab.

 

Yep. And as the old saying goes, "Measure twice, cut (or in this case weld) once".

 

ha ha ha. very true advice but being able to weld is what separates us from fussy machinists and their high tolerances.