Looking for advice on how many sheets of bride fabric i need to reupholster the car. Like this:


Looking to get 2 Bride Zeta III FRP Seats, but i want the door panels, rear seats, and everything to match.

How many sheets of bride fabric do i need, and where can i get it?

How many cushions would i need?

Any advice on this topic?

 

you dont need more cushion because the rear seat just needs to be re-wrapped with the BRIDE fabric.

100cm x 76cm for $95.00

thats for a Evo 8 Rear seat.

Also of note, the Fabric also has a soft foam backing integrated onto the upholstery, so it is not just the fabric alone.


you can call more-japan.com to order

 

For the doors (im assuming front and rear?) you need to of the horizontal sheets - those have 2 short bride prints on left/right sides of the fabric. For the rear seats, you can probably also get another horizontal piece, unless you want it to be from the seat backs to the seat bottoms, then you need 2 vertical pieces. Headliner is also a vertical. Floor mats you can use horizontal.

The sheets are around 90-99 bucks a pop depending on where you go. I can get them.

I don't think you need cushions. I wouldn't do it.

Best advise - Take it a to a shop that does quality work. If it's more expensive, than do it. Don't cheap out on the install.

 

Good to know, what is the difference between gradation and hyper. Seems like there is a lot of options on this topic.

 

double post.

 

i am actually doin the same thing. i will have my fabric in tomorrow and i will let you know exactly how many sheets ur gonna need. i ordered one for now but may have to re-order some more

 

Post some pics when you're done.