The Official Nighthawk Black Pearl Thread
#666
Did you install the duckbill your self? I picked up a used one and am trying to figure out what I have to do to install it.
#667
yes i did...pretty straightfoward just line it up and drill where you need to...deff a two person job.
#668
So did the middle bolt on the duckbill line up with the stock hole from the factory wing? and if I remember right there was like a raised lip where the bolt goes for the stock wing, did you have to grind that down at all?
#669
if i remember correctly the factory wing only had two holes on the outsides.there is no raised part in the middle...youre gonna see three holes already there that the factory wing does NOT bolt into...that is where you drill
#670
There is three bolts on my Spoon wing and im thinking the middle one goes into the middle hole (blue) from the factory hole. The other bolts have to be drilled up and off to the sides of the out holes (red). The outer holes also have about a 1/4 inch raised lip on them.
Last edited by MNfit; 12-17-2008 at 10:34 AM.
#672
the holes with the white caps on them are where you should drill,and it bolts up to the spolier there....oh and what he said ^^^ yeah,dont do that.