Aftermarket springs
Aftermarket springs
I was wondering if I installed Skunk 2 springs to lower my car if it would mess anything else up that would/could void my warranty? If so, what would it mess up and how serious of a chance do I have of messing them up with new springs?
An alignment would be required as mentioned. To do the modification right, you should do struts/shocks as well. They JUST became available from Tokico. They are the only ones so far. Some have done coilovers with complaints, others have done the springs only wishing to have struts and shocks to add to their car. I have experienced both scenarios.
An alignment would be required as mentioned. To do the modification right, you should do struts/shocks as well. They JUST became available from Tokico. They are the only ones so far. Some have done coilovers with complaints, others have done the springs only wishing to have struts and shocks to add to their car. I have experienced both scenarios.
get camber bolts for the front (not really necessary) and the
rear you'll have to shim the drums.
are you certain about the tokico's. i thought i read it was just some
mis-information by some newb at tokico.
Thread
Thread Starter
Forum
Replies
Last Post
andrewwdang
Fit Suspension & Brake Modifications
2
Aug 14, 2009 02:04 AM
Amageus
Fit Suspension & Brake Modifications
5
Feb 28, 2008 10:13 AM




