hey guys

i just got my skunk2 springs in and i am having trouble with the top mount. when u unscrew the the stock spring out of the plastic clip it comes out nice and smooth. When installing the skunk2 springs into the plastic clip it gets stuck and uneven. can someone help me out.

thanks

 

flip the spring over so the writing is up side down

 

with the writing upside down its the right way?

in this picture the writing is right side up

http://www.poffworld.com/images/DSC_01054.JPG

 

There are threads about this some where

 

flip it, my writing was upside down in the end. i spent a long time trying to force the piece on the wrong side, ended up breaking some of the tabs on the cap and wasted about 45 min.

 

thanks guys will try it out tonight

 

yup put it in the way that it goes in smoothly. should be upside down print in the front unless it's been changed.

 

well i took the springs out and fliped it upside down and they went in with no problem. thanks for all the help guys. are there going to be any aftermarket shocks coming out soon for the fit?

thanks again

Le

 

You can modify JDM ones, get the tokicos, or wait to see if skunk 2 comes out with anything like i am.