Hello what model spoon calipers would fit on a Jazz/fit?

Ive seen it done but the spoon catalog doesnt list them..

 

have u tried askin emperor motorsports bout it??? im lukin for spoon calipers 2...hope its cheap...hehehehehheheh

 

Yes, Spoon calipers will fit on to the Fit. You have to replace the rotors to 282mm to work with those calipers.

 

thanks aj! im assuming that the 282mm rotors are spoon as well? or can they be had from another honda or aftermarket brand? as for the model of spoon calipers, for what honda car were they originally for (EP, EK, DC5, or AP1?) as the spoon catalog doesnt list any calipers specific to the jazz/fit..

 

These calipers are orginally for EK-9 and you can use the Spoon 4H100 rotors which they offer for the EK-4 brake conversion.

Spoon doesnt list them on the Master catalog cuz they have a sub-catalog for the Fit alone.

Thanks

 

coolness thanks man!!

 

pls find pics
290mm rotor
but original gsr integra caliper
so far not bad grip improve alot

 

Are these calipers the Spoon 4 pot calipers you are wanting?



Got to JHPUSA.com and they have them. They aren't cheap though.

 

Aj, last question, if i purchase the 282mm spoon rotors, would the kit come with a bracket for the caliper since i assume that the larger rotor wouldnt leave room to bolt on the caliper to the knuckle staightaway?

 

The caliper will direct bolt on to the kuckle but inner rotor spacers or longer stud will be required.

 

would it be possible to source out the longer studs from another honda car? so if i change to longer studs, i can omit the spacers?

 

The inner rotor spacers are used to extend the rotor out to get proper clearance to the calipers. Wheels spacers you might no need but it depends on what offset wheel, that you will be running.

 

cool, ajr in the house! will you guys be building a fit?

 

Yes. AJR GD3 coming soon

 

Spoon doesn't sell them anymore. Endless makes a set as does Project Mu, but both are pricey.