what brackets are used to bolt in the cross bars? or are they just bolted on top on each other?

 

they're just bolted on top of each other

 

advancespeedshop.com

lemme know if you have any questions

 

Just to clarify before I place my order...

Which model of each bar do I need?
2 x cpb-cv92 (c-pillar and shock tower) <---(Fit/Civic/Integra?)
2 x cpb-cv88 (cross braces) <---(TC/AE86/CRX/Integra/240sx/GTi?)

Thanks for all the info I can't wait to try this!

 

haha I got this too... I dont have back seats either...

 

i recommend new (longer) bolts on the 4 main joints since you're stacking them.

 

hey feared,

do you work for this company? anyway you could hook it up slightly?? just curious.

 

not too much on these, they're pretty cheap as it is...

 

ordered

 

for those that want to know which bolts i used,

4 - 3/8" x 1.5" bolts (for cross braces)
4 - 3/8" x 2" bolts (for main joints where you stack the mounts)
8 - 3/8" hex nuts
16 - 3/8" cut washers
4 - 1/2" cut washers (for c-pillar bar)

and remove locking nuts on the bars as needed to make it all fit.

anyone who needs help or more clarification, feel free to ask

 

its just like a cheaper in price than the j's racing... looks really good for bolt on.

 

Yo feared, if you can figure this out for a GE8 I'll pick some up! I just wish I was closer!.

 

same parts for the ge8, ghettoboy has it already. i'll double check /w him, but i believe its the same parts

 

Awesome I'll buy some this up coming week.

 

i'll let you know which ones you need, but you dont need to modify anything for them to fit. Your seats still recline with these on since your shocks are farther back in the car.

 

I just bought 4 bars I'll do the install later.

 

*bump* awaiting pictures from GE8 install

 

ghettoboy247 has these installed in his car

 

i might do this

 

So it does make a difference?