Suspension Pic Thread
#1
Suspension Pic Thread
so there's the wheel/tire thread that has only some pics and info on different springs and coilovers...
so lets see if this works:
post up a side shot and some additional shots that shows your car's suspension/ride height/stance along with the info on your setup:
i would start but i'm on the stock suspension... not much to show...
so lets see if this works:
post up a side shot and some additional shots that shows your car's suspension/ride height/stance along with the info on your setup:
Springs:
Struts (OEM/Aftermarket):
Coilovers (any special spring rates installed? revalved?):
Wheels (brand, type, diameter, width, offset, weight):
Sway Bars (OEM/Aftermarket):
Braces:
Alignment specs (OEM or custom) (camber bolts/plates?):
Is this your DD? Autox? Road racing? Drag racing?
Impressions? Likes/Dislikes?
Struts (OEM/Aftermarket):
Coilovers (any special spring rates installed? revalved?):
Wheels (brand, type, diameter, width, offset, weight):
Sway Bars (OEM/Aftermarket):
Braces:
Alignment specs (OEM or custom) (camber bolts/plates?):
Is this your DD? Autox? Road racing? Drag racing?
Impressions? Likes/Dislikes?
Last edited by apexanimal; 06-03-2011 at 10:41 PM.
#7
coilovers: Skunk2 Pro C
endlinks: PowerGrid custom endlinks (shortened for my skunk2 coilovers, I blew the hell out of the skunk ones and they are garbage so i upgraded.)
special spring rates: Skunk2 special request 12k front, 10k rear.
revalved: Negative. maybe in the future. The Pro C's are supposed to be able to take up to 18K spring rates. Just dont know if they are currently valved for that. probably not. haha. My next upgrade will be some crazy rates from Hyper Coil. Then a re valve.
sways: Progress rear anti sway bar 22mm. stock front.
braces: J's racing Cross bars, Cusco Replica (DME) strut bar (this bar does NOT connect to my struts at all, this physically connects to the chassis above the shock towers under the body paneling. you must remove paneling to install. shit is functional), J's Racing C pillar bar. CAGE COMMING VERY SOON!!! 6 point custom chromoly
alignment specs:
Front L & R: Camber -2.5°, Tow 0°
Rear L & R: Camber -1.8°, Tow 0.17°
camber bolts/plates: I used SPC camber bolts in conjunction with the built on skunk2 oval camber holes. More camber can be achieved also with this setup. My rear has the good old washer trick. Its fine as I have tracked on it on road courses MANY times. Ill get plates when some metal ones are made or something. screw those plastic ones.
is this your dd: ALL DAY BABY! haha second car is eventually in the future.
autox: I have probably 3 times. Really not my thing and im not going to lie, I really SUCK at autoX.
road racing: YES! my fit has seen the road course many times! it is its natural environment ^_^
Here are my only really current pics. Ill get more one i clean it up and it stops raining here.
endlinks: PowerGrid custom endlinks (shortened for my skunk2 coilovers, I blew the hell out of the skunk ones and they are garbage so i upgraded.)
special spring rates: Skunk2 special request 12k front, 10k rear.
revalved: Negative. maybe in the future. The Pro C's are supposed to be able to take up to 18K spring rates. Just dont know if they are currently valved for that. probably not. haha. My next upgrade will be some crazy rates from Hyper Coil. Then a re valve.
sways: Progress rear anti sway bar 22mm. stock front.
braces: J's racing Cross bars, Cusco Replica (DME) strut bar (this bar does NOT connect to my struts at all, this physically connects to the chassis above the shock towers under the body paneling. you must remove paneling to install. shit is functional), J's Racing C pillar bar. CAGE COMMING VERY SOON!!! 6 point custom chromoly
alignment specs:
Front L & R: Camber -2.5°, Tow 0°
Rear L & R: Camber -1.8°, Tow 0.17°
camber bolts/plates: I used SPC camber bolts in conjunction with the built on skunk2 oval camber holes. More camber can be achieved also with this setup. My rear has the good old washer trick. Its fine as I have tracked on it on road courses MANY times. Ill get plates when some metal ones are made or something. screw those plastic ones.
is this your dd: ALL DAY BABY! haha second car is eventually in the future.
autox: I have probably 3 times. Really not my thing and im not going to lie, I really SUCK at autoX.
road racing: YES! my fit has seen the road course many times! it is its natural environment ^_^
Here are my only really current pics. Ill get more one i clean it up and it stops raining here.
Last edited by JCrimson; 04-25-2011 at 03:54 PM.
#9
here's side shot for ya (sorry, its early morning camera phone pic):
Swift Springs
Progress RSB
C-Pillar Bar
alignment specs: out of wack (need to go alignment shop fo'sho)
Daily Aggressive Driver
Swift Springs
Progress RSB
C-Pillar Bar
alignment specs: out of wack (need to go alignment shop fo'sho)
Daily Aggressive Driver
#10
Merchant / Group Buy Organizer ( non-certified )
iTrader: (4)
Join Date: Jan 2008
Location: Morgan Hill, CA
Posts: 452
Here's my current setup.
Skunk2 Springs
Stock shocks / struts
No RSB yet (I heard it had issues when ran with the Skunk2 springs)
Aspec strut tower bar (who cares if it may not do much, looks tight)
Alignment done at Honda Dealer
Driven Daily
Skunk2 Springs
Stock shocks / struts
No RSB yet (I heard it had issues when ran with the Skunk2 springs)
Aspec strut tower bar (who cares if it may not do much, looks tight)
Alignment done at Honda Dealer
Driven Daily
#13
Swift Sport Springs
apexanimal asked for some Swift Sport Spring pics from some of us on the Swift thread...
https://www.fitfreak.net/forums/fit-...read-pics.html
Here's what I have in my album:
Stock springs before:
Swift Springs after (7 months later, but you get the idea):
The only straight-on before/after shots that I took:
Spring and mounting shots:
Rear spring
Front spring
Enjoy!
https://www.fitfreak.net/forums/fit-...read-pics.html
Here's what I have in my album:
Stock springs before:
Swift Springs after (7 months later, but you get the idea):
The only straight-on before/after shots that I took:
Spring and mounting shots:
Rear spring
Front spring
Enjoy!
#19
$88 from Street Racing Life
pretty awesome, comes with 2 brackets to mount in the middle with stock holes. you just need to drill or use the self tapping screws on the sides. if you have a sport model they can go thru the small metal clips.
it comes in black like the first pic, i painted mine myself. using color matching paint from www.automotivetouchup.com (sand it so the paint sticks then 3-4 coats of primer + 4 coats of base color + 3-4 coats of clear)
was a bit of work but the end result was worth it.