Third Gear LED Full Package!!!!
#1
Third Gear LED Full 01-07 Fit Package!!!!
Third Gear Performance Presents a 01-07 Fit LED PACKAGE
We all know that HONDA uses weak lighting for there cars to cut on cost. So we at Third Gear Performance are here to introduce a LED package to fit all needs. Currently we will be replacing your Dome Light and Trunk Light as the Stage 1 Package. Stage 2 Packaging include the Dome Light, Trunk Light, and License Plate Light.
You'll Receive:
Stage 1---
2 x T10 Wedge 5050 Panel Board
Colors: Super White or Blue
Stage 2---
2 x T10 Wedge 5050 Panel Board
2 x T10/194 Wedge 5050- 5SMD LED
Colors: Super White or Blue
These are the brightest SMD LED bulbs on the market.
Optional:
Upgrade your Map Lights to JD-Lighting High Intensity 5W to any of these colors White, Red, Blue, or Yellow.
These will only fit the Dome lights in the front.
JD-Lighting is the frontier runner of High Intensity LEDs that revolutionize the market of LED. These are guaranteed the Brightest LED on the market. Add $10.
370z Member Pricing:
Stage 1 Kit: $30 Shipped Within the USA!
Stage 2 Kit: $45 Shipped Within the USA!
Upgrades to Stage 1 or 2 Kit: add $10 Shipped Within the USA!
Stage 1 Photos Upgrade w/ JD-Lighting
Dome/Map Lights
Trunk Light
Stage 2
License Plate Light
JD-Lighting Difference is 2x brighter then our 5050 SMD Panel. These will blind you.
VS
More Photos are Available on request!!
***Big thanks to TunaDaMan for the Photos and the Test Vehicle! ***:tup:
Last edited by ThirdGear; 10-29-2010 at 07:09 PM.
#5
This is a direct fit, all you'll have to do is slide it in. For one is going to be $15 shipped.
#6
So the upgraded stage two is 55 shipped? Kinda wish you had the led parking lights for the head lights...none the less might still order the stage two's.
#7
I might have the LED for the parking lights... Would you know the bulb size. The Stage 2 package upgraded is $55 shipped.
#11
I found out that the COB don't like current fluctuations. What happens if the alternator pushs it to 13,8 Volt or the battery goes under 12 Volt?
A second thing is "JD Lightings". What happens to this brand? Their website www.jdlightings.com is offline and I found many different logo designs under this name?!
A second thing is "JD Lightings". What happens to this brand? Their website www.jdlightings.com is offline and I found many different logo designs under this name?!
#12
I found out that the COB don't like current fluctuations. What happens if the alternator pushs it to 13,8 Volt or the battery goes under 12 Volt?
A second thing is "JD Lightings". What happens to this brand? Their website www.jdlightings.com is offline and I found many different logo designs under this name?!
A second thing is "JD Lightings". What happens to this brand? Their website www.jdlightings.com is offline and I found many different logo designs under this name?!
We distribute JD-Lighting and the website is being redone to be more attractive to the end user. There lots of companies that try to bootleg this brand because its a upcoming brand.
#13
COB stands for "Chip on Board". This is the name of the LED module that is used in your Kit.
And I don't have alternator problems. This is a normal thing in a car. Voltage varies between 11,8 (emtpy) and 14,4 Volt (max. charging voltage).
And I don't have alternator problems. This is a normal thing in a car. Voltage varies between 11,8 (emtpy) and 14,4 Volt (max. charging voltage).
#14
My dome light is 35 little LED's or so. It flickers when my capacitor is off and my battery is being drained. Doesn't happen so much anymore since the capacitor install. But it didnt damage the board or any LEDs from the voltage varying only made them flicker when the battery was low. (sitting in a parking lot, HID's on, system on)
#15
I'm talking about "JD-Lighting High Intensity 5W". This is a COB LED and it is well known that those don't like current fluctuations.
Here you can see the COB LED without the heatsink:
Chip on Board LED Modul 4W, warmwhite, high CRI, 216lm | buy online
Here you can see the COB LED without the heatsink:
Chip on Board LED Modul 4W, warmwhite, high CRI, 216lm | buy online
#16
We'll you should have any issue with the JD 5w because it only draw very minimal voltage. You shouldn't see it flicker or anything even though the your voltage from the battery changes. We have used this on a 9v battery before without issues.
#20
Yeah.... no problem. Just Pm me what they need and bulb sizes if possible. If they want to go with the just bulbs, panel board or JD-Lighting.