Fit will be lowered on Tein lowering springs as of tommorow morning.

Friend want's me to put the Integra GSR rims she has on her Integra onto her new Fit while we're putting on the springs. Will they with no problems?

I don't know anything about the rims, as far as size, width, backspacing, and what size tires are on them. Just looking for a quick yes/no guess or answer. Thanks!

 

They should. There may be minimal rubbing, but if you don't rub, you're not low enough.

 

Theres more than one set of GSR wheels. I believe theres 3.
Ive had Fat5's on my Fit. The fit fine. I was running 225/50/15's also, minimal rubbing. Just swap over the stock 195/55/15's and youll be fine. The stock tires on factory GSR's are too big. I believe theyre 60 series.

Blades and Sunflowers fit also. Do a search.

 

you wont have ANY problems at all. they are way to small to rubb.

 

Thanks for the quick replies... I'm going to find out tonight for sure what size they are and what kinda tires they have. I'll post back and see what you think.

 

i had ls rims on my car. they are all the same size and offset.

 

They are 15" rims with 195/50 tires...

The stock Fit rims she has now with the hubcaps are 14" rims with 175 width, I forgot the sidewall but it's obviously larger.

Will the wider tires on the GSR rims be okay on the Fit? I know height-wise it should be fine because of the lower profile sidewalls.

Also the only other problem we might have is putting the fit wheels onto the Integra. The Integra is lowered as well on Tein springs, so the taller Fit wheels may become a problem. We'll see I guess...

 

I want meshies! but every1 that has them look like shit, too much curbage

 

haha raymond youre the best

(thats my car hes talking about)

 

yeah dude, my meshies were mint. and i scooped them up for 150. not bad, then i just painted them.

those rims will fit, with no problem. they will look funny in my opinion becuase of the 50 series tire. but yeah thats just increased wheel gap. when i run the 50 series my wheel gap increased by 1 finger all around.
if you stay within specs...itll look nice.


but 50series i guess handled a bit better. not by much though.

 

As I know you already put the wheels/tires on. Those arent stock size tires anyway so fitment should have been plenty fine.

I believe that. I tried so hard to find mint UNPAINTED ones. I wanted to do it also, this loser (SD_MR_FIT) got to it before me.
Once he posted those pics of them on his Fit I couldnt do it.

Uhh, thats cheap as fug. Cheapest I found was $250 maybe $200 with bald tires and beat to hell. I even tried to trade my Fat5's with newer 225's for Ls's with bald ass tires. No go.

Your car is sexy time. My name is Raymond too.