Sorry if this has been covered, but I've been searching and can't find it.

Just picked up a set of Acura LS mesh wheels on CL to put on my GD3.

Can someone confirm that I can use the OEM lug nuts with these?
Assuming I stay with 195/55/15 tires, do I need to be concerned about any potential fitment / rubbing issues? Looks like these are 45 offset, so I'm hoping -10 difference is insignificant.

I also need center caps - any tips on the best place get some (besides ebay)?

Think I got a really good deal. The guy said they came with his car when he bought it and he wants BBS. They were powdered/polished. 3 of them still had the packing foam /tape on them.

 

I have put these on older civics in place of the steelies and the stock lugnuts always worked no problems.

If you really need to be sure, remove a lugnut from your car and put it on the rim, look at the back of the rim, and see if the lugnut seats correctly.


If its any help, I have tuner style lugnuts holding on a steelie spare on the camry while I search for a cheap pair of 235/35/19s for it. That lugnut is definitely not intended for a stock steelie but it has held on for the last few thousand miles the car has driven

EDIT those 195/55/15s will be slightly smaller diameter then your stock wheels. zero rubbing issues.

Im planning a set of 195/60/15s for my 13 base

 

Yes you can use the stock lugnuts, 195/55/15 is your stock tire size and the +10mm should be fine. As far as center caps i'd just go with eBay or keep an eye out on CL or Honda-Tech Marketplace.

 

Thanks! Just what I was looking for.

For anyone else reading this thread, I found that Honda Part #44732-S5P-A01 is a 58mm center cap that will fit. It's listed as being for a 01-04 Civic. There are a couple places selling them for $8-9 ea.

 

I have stock lugs on mine

 

Nice! Can't wait to get mine installed.

 

Take pictures once installed. Im interested in how they look!

 

Will do, but it might not happen until next spring.
The tires on it now are almost gone and I plan to get winter tires on the stock wheels in the fall.
I plan to put a set of G-Max's on these wheels in the spring.

 

You could look at my signature, I have meshies on mine if you're interested on how they look

 

Promised pics when they were on the car, so here you go:

 

Looking sharp!!! Looks good on em! Way to go man!

 

Looks great. I looked for LS's for a few months before giving up and going with Konig Feather's. I still like the LS's better.

 

Nice: someone polished those rims to perfection! going to do a set for my honda and that looks great on ur GD3.

 

i wish i can find a pair.