Yellow fog light bulbs
Moved license plate
Skunk2 MegaPower exhaust
Yellow tint on fog lights
Fujita SRI
Eibach Sportlines
17s

Coming:
Fender widening (to stop tire-rub)
Header
Strut bar
HID headlights

 

I'm keeping my car stock for the most part. Future plans:

Tint
HID's
Alarm
K24 Swap

That's about it...

Just kidding about the K. lol, my modding days are over.

 

From start to current:

Project-Mu shift knob
OEM cargo tray
OEM cargo net
PIAA Extreme White headlights and fogs
vertical rear wiper conversion
Last Station Power Box Type R intake
Tomoki LL-size Kurz antenna (body colored)
OEM all-weather mats (for winter only)
J's Racing Titanium muffler and b-pipe
Zoom Engineering carbon/kevlar rearview mirror
T1R V2 Plus Ignition Booster
JDM Type-R oil cap
German Euro-plate
Beatrush C-pillar bar
H-Fit hard shifter mounts
Mugen Quick Shifter
Mugen shift boot
PasswordJDM magnetic drain plug set

Coming soon:

Cusco front strut bar (this week)
Cusco rear strut bar
T1R lower arm bar
J's floor bar

after that probably finish off my interior w/ Mugen pedals, JDM satin door pulls, and a set of Karo mats if they'll do a custom set for USDM Fit's. A J's header is on the list and coilovers too. Depends on funds available which comes first.

 

Tint within the first week
Megan Racing exhaust
Sprayed the stock wheels gold
LED tail lights
Voodoo shift knob
Skunk2 SS kit
Fujita SRI
Weapon*R street headers
Garmin Nuvi 200w
Konig brightlites w/ Proxes 4
Nokya yellow H11 bulbs for the fogs

 

Current Mods (in order of application):
0. (Dealer) OEM Rear Bumper Appliqué
0. (Dealer) OEM Muffler Finisher
0. (Dealer) OEM Cargo Cover
1. (Dealer) OEM Carpet Floor Mats
2. (Dealer) Tint
3. (CoverKing) Dash Cover
4. (Japanparts) JDM Center Console
5. (ICBMotorsport) JDM Fit GD3 Window Visors
6. (HFit) HF-Supa Suka Intake
7. (Robear Racing) Tanabe Medallion Touring axle-back
8. (Local Shop) Enkei RPF1 - 16"
9. (AJ Racing) Voltage stablizer
10. (AJ Racing) Grounding kit
.
<< Traded in Fit A/T...for Fit M/T Fit >>
.
11. (RAAMaudio) Sound Deadening (RaaMat/Ensolite) cargo area & doors
12. (ICBMotorsport) JDM Fit GD3 Window Visors (1st set remained on A/T)
.
.
Skip 10 mods...
.
.
23. (Linear-Logic) ScanGauge II
24. (Dealer) Magnetic Drain Plug
25. (NeverEnoughAuto) Weapon R Street Header
26. (OptionsAutoSalon) Momo Tall-Lether Shift Knob
27. (Local Shop) Broadway Rear-view Mirror
Future Mods (more-than-likely):
1. Tanabe Front Strut
2. Tanabe Front Lower Strut
3. Head-Unit (Kenwood)
4. Front Components (Boston Acoustics)
5. Rear Coaxials (Boston Acoustics)
6. Schosh (2-DIN)
Possible Mods:
1. T1R Forged Aluminum Crank Pulley
2. Megan B-Pipe
3. Swift Sport Springs
4. Skunk2 Coilovers
5. Progressauto Rear Anti-Sway Bar
6. StrutKing - Carbon-Fiber coated rear-view mirror cover
7. StrutKing - Shift boot cover
8. StrutKing - E-Brake cover
9. KraftWerks S/C
If I had money to burn mods:
1. T1R Header
2. T1R B-Max Carbon Intake

 

1. Intake
2. weighted shift knob
3. LED dome lights
4. exhaust

I'm hoping to get some maplights and change out my A-Spec intake for a DIY intake.

 

Picked up mugen catalog and ordered it all :P


....then wife hated the car.....

 

where can one find this "mugen catalog"?

So Far
1. I've tinted it 35% Lumar film all the way around. Cost me $0. Hook up from my friend who tints.
2. Avic-D3 from pioneer.
3. 1/0 guage wiring for subs
4. Went from 2 12s to 2 15s back to 12s got rid of those 12s put 2 8s Now i'm back to 12s. (I work for a car audio store)
5. Took out the D3 bought alpine CDA-9887 and another metra kit.

I also put 8,000 miles on the car in 5 months

Future Plans
1. Wheels
2. Exhaust
3. Upgrade door speakers and add amp for those
4. Suspension
5. K20 after 60,000 miles. Also to keep interest in the car
6. Then intake, and various engine mods

 

We are a Mugen dealer so I just contacted them and asked for everything they offered for the Honda Fit and ordered it.

 

2008 Fit Sport M/T- Milano Red

Yellow fog bulbs
Tein S-Techs
Aspec Cold Air
Aspec Burnt-Tip axel back
Aspec F/R strut bars
Aspec B-Pipe (still waiting)

Those are my mods in order

What the future holds: Front Sway bar, Corbeu driver side seat, Wheels/Tires, Tints, Camera-to post pics.

Obviously the modding will never stop it's an addiction but thats what is happening in the next month or sooner.

 

Just to update, had my car 3 weeks now, here's my list :-P

1. *CHECK* Rims(Rota Auto X)
2. *CHECK* Lowering Springs(Progress)
3. *CHECK* Custom Intake
4. *CHECK* Zeta Dead Pedal
5. *CHECK* All Weather Floor Mats
6. *CHECK* Tint(35% front 20% rear)
7. *CHECK* H-Fit Short Throw Shifter
8. *CHECK* Muffler(HKS Hi-Power Axleback)
9. *CHECK* Header(Weapon*R Street)
10. B-Pipe(Megan)
11. Mugen Visors
12. Head Unit/Metra Kit(Alpine CDA-9885)
13. Infiniti Basslink
14. All Speakers + Sound Deadening(Type R Coax rear, tweeters for front and (2)Dynamat for front doors)
15. Bug Deflector - $115
16. Rear Sway(Progress) - $145
17. Falken ZIEX ZE-912 195/50/15
18. Last mod, Nitrous.(NX Fly-By-Wire kit @ 35-50-75 shot
w/ window switch and safety features)

 

i did.
1.rims
2.exhaust
4.springs>coilovers
5.tint.
6.intake
7.tires
8. Moved license plate
9. changed radio unit and 4 front spaekrs
10.repaint part of front bumper and lip. cause there was hole after i remove the oem license plate.

future make fog light yellow.
maybe k20 swap or supercharger.

 

In order up to date:
- T1R S-Coil V1 springs
- Volk TE37 Cups and wrapped in Azenis
- J's Racing brace bars:
--- Front strut bar
--- Rear strut bar
--- C-pillar
--- Lower tie Bar
--- Inner fender Braces
- Spoon drop in filter
- Spoon N1 Cat back system
----- T1R V1 Spring swapped out for V2's -----
----- Spoon drop in swapped out for Injen SR -----
- TSX retro headlights
----- J's rear bar swapped out for Cusco rear bar -----
----- Injen SR swapped out for k&n SR -----
- Nardi deep corn wheel / Slash hub / Works Bell QR
- Greddy Turbo Kit
----- J's Lower tie Bar taken out because it go in the way of the turbo manifold -----
----- k&n SR swapped out for GReddy intake/filter -----
----- T1R V2's swapped out for T1R 52 BMax's -----

Sitting in my room waiting till I find time to install them :
- reinstall T1R test pipe (was taken off before Turbo was installed)
- J's Racing LSD
- T1R Clutch
- T1R Guage pod
- Greddy SMI Guages
- New set of OEM Rotors
- J's Racing front Lip (needs paint)
- Duck bill spoiler
- Spoon rear wiper blade
- Spoon antenna
- OEM JDM armrest

Soon:
- Greddy Boost Controler
- Injectors?
- Retune for 7-8lbs