Honda FiT Safety Recall: Floor Wire Harness Corrosion

  #1  
Old 02-05-2008, 12:51 AM
Benggolf's Avatar
Member
5 Year Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: Richmond, B.C., Canada
Posts: 1,109
Honda FiT Safety Recall: Floor Wire Harness Corrosion

Just received my copy of a safety recall for the Honda FiT.

For your information, the problem is described as follows:

"Splices in the floor wire harness may not be sufficiently sealed. In areas where road salt is used, the driver may get in the vehicle with a mixture of snow and salt on their feet. The water and salt that soaks through the carpet may enter these splices. Over an extended period of time, the wire splices may corrode, causing a faulty connection in the SRS occupant detection system (ODS). If this connection fails and the vehicle is in a collision, the ODS may not operate properly. As a result, the side airbag may deploy even if a person is leaning toward the outside of the front passenger seat, or the front passenger's airbag may deploy even if the front passenger weighs less than about 30 kilograms."

What should you do?

Contact your Honda dealer to schedule an appointment to have your vehicle's wire harness splices sealed at a convenient time for you. This will also allow your dealer to give you an ideas how long they will require your vehicle - usually less than a day - to perform the repair. the dealer will perform the necessary repairs on your vehicle, free of charge.
Hope this helps all you FiT owners out there. Driver safely.
 
  #2  
Old 02-05-2008, 12:53 AM
startroops's Avatar
Member
5 Year Member
Join Date: Oct 2006
Location: Hong-couver
Posts: 105
Had mine done already, no corrosion was found at all.
 
  #3  
Old 02-05-2008, 12:58 AM
Benggolf's Avatar
Member
5 Year Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: Richmond, B.C., Canada
Posts: 1,109
Great! People who have all-weather mats would likely not have any problems.
 
  #4  
Old 02-05-2008, 01:11 AM
smatts's Avatar
Honda Fit Forums Moderator
iTrader: (1)
Join Date: Apr 2007
Location: New Wesminster, BC
Posts: 1,704
Originally Posted by Benggolf
Great! People who have all-weather mats would likely not have any problems.
Yeah I have a set, and had no problems found when I took it in.
 
  #5  
Old 02-05-2008, 07:53 AM
FELIXY69's Avatar
Member
5 Year Member
iTrader: (6)
Join Date: Jun 2007
Location: RICHMOND BC CANADA
Posts: 2,790
i got the letter
 
  #6  
Old 02-05-2008, 05:30 PM
azlynn's Avatar
Member
Join Date: Sep 2007
Location: Canada
Posts: 61
Got it today too. Poor little Fit.
 
  #7  
Old 02-05-2008, 05:33 PM
Illusive's Avatar
Retired Moderator
iTrader: (4)
Join Date: Apr 2006
Location: Calgary, AB, Canada
Posts: 4,742
I got the letter...too lazy to take it in until I get my oil change done...which should be soon, I'm at 30%
 
  #8  
Old 02-05-2008, 05:53 PM
j5ive's Avatar
Member
iTrader: (2)
Join Date: Oct 2006
Location: Richmond, BC Canada
Posts: 262
got my letter over 2 weeks ago, and only took it in 5 days ago. probably not a big deal really. I only have carpet mats and no corrosion was found on mine.

If no corrosion is found, only need to splice two wires. if corrosion is found, need to replace harness, which means it might take longer. A day if they have the part in.
 
  #9  
Old 02-06-2008, 12:55 AM
Qst's Avatar
Qst
Qst is offline
Member
Join Date: May 2007
Location: Vancouver, Canada
Posts: 54
Got a called yesterday. I have the mat so i'm guess my fit is fine.
 
  #10  
Old 02-08-2008, 12:03 PM
Mugen_Dom's Avatar
Member
iTrader: (1)
Join Date: Jan 2006
Location: Vancouver, BC
Posts: 1,408
I got my letter yesterday...

I've had the all weather mats so I should be fine...but i guess i'll take it in just to be safe...
 
  #11  
Old 02-08-2008, 02:28 PM
GeorgeC's Avatar
Member
Join Date: Oct 2007
Location: Vancouver, BC
Posts: 101
took it in, didn't really notice anything different
 
  #12  
Old 02-08-2008, 02:38 PM
smatts's Avatar
Honda Fit Forums Moderator
iTrader: (1)
Join Date: Apr 2007
Location: New Wesminster, BC
Posts: 1,704
Does anyone know where this harness is actually located, and what panels / parts are needed to remove to see it?
 
  #13  
Old 02-08-2008, 02:40 PM
doctordoom's Avatar
Supervillain
5 Year Member
iTrader: (7)
Join Date: Sep 2006
Location: Los Angeles/Orange County
Posts: 4,261
Originally Posted by smatts
Does anyone know where this harness is actually located, and what panels / parts are needed to remove to see it?
it's under the plastic cover on the driver's side floor right next to the door. that plastic panel that you step over whenever you get into and out of your car.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
timemachine
2nd Generation (GE 08-13)
2
01-23-2017 02:32 AM
Sera
Greater Vancouver BC Community
10
02-21-2008 07:20 PM
kancerr
General Fit Talk
42
02-05-2008 04:03 PM
Cat
General Fit Talk
6
12-19-2007 02:35 AM
Digimer
Other Car Related Discussions
3
03-27-2007 06:56 PM


Thread Tools
Search this Thread
Quick Reply: Honda FiT Safety Recall: Floor Wire Harness Corrosion



All times are GMT -4. The time now is 07:00 PM.