installing 3rd brake light
#4
- open the hatch
- take the cover off (two little press-in tabs)
- unplug white connector plug thingy (you can do this later if it's easier)
- unbolt two 10mm bolts
- use a small flat head or something to push the two inner clips in (that are going into the mounting hole between where the two bolts were)
- for the plug - slide the taped wires to the untaped area so you can get it through the open area of the hole (the assembly should be unattached to the car now)
- press on the two exposed tabs with a small flathead, when you get both unhooked, just push it out and the two on the opposite side (the top) will come undone
#8
lol. thats for the outlet.. basically you turn it vertically and plug it into the slot where you unplugged the original one... no worries I thought the same thing.. if you never get it just pm me. oh wait well actually thats how it works for the 07-08 models... hmm should be that same... i think
Last edited by hondafitgow; 09-11-2009 at 07:32 AM. Reason: adding
Thread
Thread Starter
Forum
Replies
Last Post
koolkevin1107
Fit Interior & Exterior Illumination
71
05-04-2016 09:27 AM