2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

GE8 Seat rails!!??

Thread Tools
 
Search this Thread
 
Old Jan 7, 2011 | 03:12 PM
  #21  
ThEvil0nE's Avatar
Member
iTrader: (12)
Joined: Jun 2010
Posts: 3,626
From: Illinois
JURAN, BER, Silk Road makes GE/GD rails
 
Old Jan 7, 2011 | 05:02 PM
  #22  
cd4ag's Avatar
Member
5 Year Member
iTrader: (1)
Joined: Sep 2009
Posts: 65
From: Vancity, Canada
Originally Posted by Tedkou
I just left mine unplugged. Gonna "black tape" the light as soon as it warms up.
Do u know if that means the rest of the system is still active? or if the light comes on does that disable the system? Can u stick a resistor in there or anything?
 
Old Jan 8, 2011 | 01:49 AM
  #23  
Tedkou's Avatar
Member
Joined: Sep 2010
Posts: 54
From: VA
Yes, the rest of the system is still active. Tho I believe (if all my research was correct) any of the duel stage air bags will only fire at the max speed.
 
Old Jan 12, 2011 | 01:29 PM
  #24  
AJR Jay's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Sep 2008
Posts: 306
From: Richmond, BC
If you're still looking for rails, we can get this for you. We can bring in the Bride rails, the only downside is since we're currently sold out, we need to bring more in which will need to be ordered in.

If you have any inquiries, let me know and I can be glad to help.

Regards,

Jason @ AJR
 
Old Sep 2, 2011 | 06:54 PM
  #25  
RetroAttack's Avatar
Member
5 Year Member
Joined: Apr 2010
Posts: 311
From: Calgary, Canada
Hey Guys, Questions on some good places to get rails from?
I just ordered some Bride Digo seats and i need to find some rails to mount them to.
I was looking at the MO or YO type rails are the ones bride says fit the seats.
Is there any others that work with these seats?
 
Old Sep 3, 2011 | 09:38 AM
  #26  
Chad T's Avatar
Member
Joined: Jul 2009
Posts: 462
From: Columbus OH
5 Year Member
Get the brackets from Wedge Engineering. Driver's side 2148T Pass side 2149T. On the sliders there are only a couple different types from Recaro. Make sure you get the ones that say "with tabs".

You can see bracket and sliders here. I actually cut the tabs shorter on the front of the sliders so I could use the bottom mounting holes.



The tabs on the sliders bolt to the ends of the tubes on the top of the bracket.

As far as the airbag light goes..On the driver's side all you have to do is remove the seat posistion sensor from the stock seat and leave it plugged in. Just make sure it won't contact any metal.

Then just jump the airbag connector with a 2 ohm resistor. No airbag light for me and I've had my recaro in for about 3 months now. You can read more about my install here.

https://www.fitfreak.net/forums/2nd-...ll-begins.html

The passenger seat is much more complicated as far as airbag sensors. I didn't put a seat on the pass side.

DO whatever you need to do to get Recaros in your Fit!!! Makes a huge difference.
 
Old Sep 5, 2011 | 10:07 AM
  #27  
wetphoto's Avatar
Member
Joined: Sep 2011
Posts: 395
From: Peoria, AZ
Everything is always so difficult with the Fit.
 
Old Sep 5, 2011 | 01:46 PM
  #28  
FitSSM2k10's Avatar
Member
Joined: May 2011
Posts: 44
From: Mooresville, Indiana
Originally Posted by wetphoto
Everything is always so difficult with the Fit.
Not too difficult. A&J sells the seat rails...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bluflu
2nd Generation (GE 08-13)
6
Dec 28, 2023 04:33 PM
Dafeex
2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum
4
May 17, 2018 08:19 PM
Wafulz
2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum
2
Jan 14, 2013 09:20 PM
andyd
Fit Interior Modifications
3
Feb 11, 2008 12:59 AM
tylermiyamoto
Fit Interior Modifications
5
Feb 9, 2008 04:15 PM




All times are GMT -4. The time now is 11:35 AM.