Post aggressive Fit wheel stance
I havent ran wide wheels. Just really low offset.
falken hanabi's??? what ever they are it looks sick with the lip like that
KSport Kontrol coils all the way down
Enkei RP-02 15x7 +35 offset
camber not really worked out yet, need alignment
front fender lining pulled and pushed up and over the tabs to stop rubbing

Enkei RP-02 15x7 +35 offset
camber not really worked out yet, need alignment
front fender lining pulled and pushed up and over the tabs to stop rubbing

Last edited by trancedsailor; Mar 25, 2009 at 07:05 PM.
sick wheels u got thar 

15x8 +25 Axis Og's 195/50
As far as rolling and cutting, the rear was rolled a bit just to pull it away from the tire. Tire rubs bumper on bumps,dips, and with passengers in the rear. I have yet to cut it to fit the wheels.. just letting it naturally wear itself down.
The fronts are just cambered with what i could adjust by loosening the 2 bolts on the strut and piveting it inwards, then re tightening the bolts. I only rub the weather guard here and there, nothing major.
Car is lowered on Skunk2 Pro C's. Running no collars in the rear and fronts aren't near as low as it can go..



As far as rolling and cutting, the rear was rolled a bit just to pull it away from the tire. Tire rubs bumper on bumps,dips, and with passengers in the rear. I have yet to cut it to fit the wheels.. just letting it naturally wear itself down.
The fronts are just cambered with what i could adjust by loosening the 2 bolts on the strut and piveting it inwards, then re tightening the bolts. I only rub the weather guard here and there, nothing major.
Car is lowered on Skunk2 Pro C's. Running no collars in the rear and fronts aren't near as low as it can go..



hi ,whats the idea behind that black front end + rear bumper?



















