Unofficial Honda FIT Forums
0 2019/01/28 12:20:59
0 2019/01/28 12:22:57
0 2019/01/28 12:25:24
0 2019/01/28 12:28:13
0 2019/01/28 12:28:47
0 2019/01/28 12:30:38
Ring terminals, 14gauge wire (suitable for 1 amp, prolly more in such short length), and mini quick disconnects. I just loosen the female heads a little with a knife or whatever so that they dont grip pins or prongs too tight. Rings go to the battery, so just buy a proper size.. or do whatever if you have a portable 12v dc power supply
Ring terminals, 14gauge wire (suitable for 1 amp, prolly more in such short length), and mini quick disconnects. I just loosen the female heads a little with a knife or whatever so that they dont grip pins or prongs too tight. Rings go to the battery, so just buy a proper size.. or do whatever if you have a portable 12v dc power supply
0 2019/01/28 14:55:39
0 2019/01/30 23:51:42
My 91 chevy cuz i see the engine bay in my nightmares
My 91 chevy cuz i see the engine bay in my nightmares
0 2019/01/30 23:57:02
This is... *supposed to be*.. our engine. Correct stop sucking to suck less based on throttle position, or whatever
This is... *supposed to be*.. our engine. Correct stop sucking to suck less based on throttle position, or whatever
0 2019/01/30 23:58:40
0 2019/01/31 00:16:18
0 2019/02/05 19:57:45
0 2019/02/05 19:59:08
0 2019/02/06 13:13:03
0 2019/02/06 13:13:33
0 2019/02/06 13:14:00
0 2019/02/06 13:14:48
0 2019/02/06 13:36:53
0 2019/02/08 17:18:59
This is the only pic i found for it where im confident its the GE.
This is the only pic i found for it where im confident its the GE.
0 2019/02/08 17:20:00
I didnt want to kink it. Itll be re-routed later when I find a better path. This method seemed the least hilarious.
I didnt want to kink it. Itll be re-routed later when I find a better path. This method seemed the least hilarious.
0 2019/02/10 15:54:21
0 2019/02/10 15:55:02
Used some double sided 3m to affix a rubber bushing so it didnt rattle on the airbox
Used some double sided 3m to affix a rubber bushing so it didnt rattle on the airbox
0 2019/02/10 15:56:41
Ring on one side, demale quik disconnect on the other. Rings to the battery, and the other to the male terminals on an injector, listen for the click. Could also put a little seafoam, techron, whatever in the top of the injector before energizing and you'll be able to see the atomization for yourself.
Ring on one side, demale quik disconnect on the other. Rings to the battery, and the other to the male terminals on an injector, listen for the click. Could also put a little seafoam, techron, whatever in the top of the injector before energizing and you'll be able to see the atomization for yourself.
0 2019/02/14 10:59:05
0 2019/02/14 17:25:24
Center console
Center console
0 2019/02/17 09:57:23
Door panel
Door panel
0 2019/02/17 09:57:51
Rear diffuser
Rear diffuser
0 2019/02/17 09:58:25
Front grill
Front grill
0 2019/02/17 09:59:20
0 2019/02/17 10:08:59
Splitter. Im sure all our stock ones are thrashes
Splitter. Im sure all our stock ones are thrashes
0 2019/02/17 10:19:45
AKA the "pcv 2.0" Paired with my hasty temporary install. Theres some words behind how this works and why its useful in our thread over in the GE section. Designed by J's Racing, copied by some dudes on ebay. 120 bucks vs. ~600 via j's.. Link time.
AKA the "pcv 2.0" Paired with my hasty temporary install. Theres some words behind how this works and why its useful in our thread over in the GE section. Designed by J's Racing, copied by some dudes on ebay. 120 bucks vs. ~600 via j's.. Link time.
0 2019/02/17 10:44:34
0 2019/02/18 19:40:57
Also OEM P/N
Also OEM P/N
0 2019/02/18 19:44:59
Which are also screw in, you can apply the jaws of the pliers beneath the plastic "washer" to apply some towards-you style pressure n unscrew it.
Which are also screw in, you can apply the jaws of the pliers beneath the plastic "washer" to apply some towards-you style pressure n unscrew it.
0 2019/02/19 14:51:39
0 2019/02/20 13:01:08
0 2019/02/20 13:02:16
0 2019/02/20 13:03:34
0 2019/02/20 13:03:53
0 2019/02/20 13:04:18