Unofficial Honda FIT Forums
0 2023/08/15 10:06:45
0 2023/08/15 10:06:32
0 2023/07/09 10:33:12
Left side of the image would be where the upstream cat/exhaust manifold affixes to the engine.
Left side of the image would be where the upstream cat/exhaust manifold affixes to the engine.
0 2023/06/03 15:16:16
Could've been cheaper or nicer, but now I know what the super cheap assy.s are like
Could've been cheaper or nicer, but now I know what the super cheap assy.s are like
0 2023/05/28 17:36:06
0 2023/05/28 17:12:04
Also, this is our pet duck, Football. Now we can all watch football together.
Also, this is our pet duck, Football. Now we can all watch football together.
0 2023/05/28 10:19:36
All reASSembled. Now needs a bath. All in cost was $230, came with new bulbs but I retained my LED daytime running bulbs. I did this instead of refinishing because I'd refinished my headlights 3 times in the past in various ways. Kits, brake fluid wipe, just buffing with a dry shop towel folded beneath an orbital sander 😂 I'm done refinishing. If I had to do it again, id have more money and get 2 depos, or even more money and get 2 tyc's. the clear cover seems nice. will update after wash
All reASSembled. Now needs a bath. All in cost was $230, came with new bulbs but I retained my LED daytime running bulbs. I did this instead of refinishing because I'd refinished my headlights 3 times in the past in various ways. Kits, brake fluid wipe, just buffing with a dry shop towel folded beneath an orbital sander 😂 I'm done refinishing. If I had to do it again, id have more money and get 2 depos, or even more money and get 2 tyc's. the clear cover seems nice. will update after wash
0 2023/05/28 10:12:27
All tools required. The flathead was actually used for the clips in the previous image, not to unseat them (I used the pink pry tool for that) but to spread them for re-seating! wacky.
All tools required. The flathead was actually used for the clips in the previous image, not to unseat them (I used the pink pry tool for that) but to spread them for re-seating! wacky.
0 2023/05/28 10:10:23
My hands weren't always as gentle as they are now. 3 busted clips of 4 that secure the bumper beneath the headlight on the right side. The left has no busted clips.. Clearly I originally worked from right to left when I first removed the bumper. It still holds well, sincerely, but I do have shame. :/
My hands weren't always as gentle as they are now. 3 busted clips of 4 that secure the bumper beneath the headlight on the right side. The left has no busted clips.. Clearly I originally worked from right to left when I first removed the bumper. It still holds well, sincerely, but I do have shame. :/
0 2023/05/28 10:05:18
0 2023/05/28 10:02:11
shitty "various manufacturer" Eagle Eyes assembly, also from rockauto going on the left. The black mounting bracket was clearly modified and fitted by someone trying very hard despite being under-equipped. Fitment was tricky vs. the Depo. Had to keep all bolts loose until I could get it fully seated. The actual light housing part seems the same as the depo though regarding fit and finish.
shitty "various manufacturer" Eagle Eyes assembly, also from rockauto going on the left. The black mounting bracket was clearly modified and fitted by someone trying very hard despite being under-equipped. Fitment was tricky vs. the Depo. Had to keep all bolts loose until I could get it fully seated. The actual light housing part seems the same as the depo though regarding fit and finish.
0 2023/05/28 09:55:38
Sweet new depo assembly from rockauto going on the right. (labeled as various manufacturer)
Sweet new depo assembly from rockauto going on the right. (labeled as various manufacturer)
0 2023/05/28 09:53:30
Leave this one on til you remove the whole thing 😂
Leave this one on til you remove the whole thing 😂
0 2023/05/28 09:51:42
Hafta take the bumper off to get at this black bracket, then remove the bracket with the headlight (it sandwiches the headlight in & has alignment nubs that prevent removing the headlight without it)
Hafta take the bumper off to get at this black bracket, then remove the bracket with the headlight (it sandwiches the headlight in & has alignment nubs that prevent removing the headlight without it)
0 2023/05/28 09:46:34
These zip ties are sweet, but may be too wide
These zip ties are sweet, but may be too wide
0 2023/05/28 08:54:50
0 2023/04/21 20:03:47
just goes from the valve cover to the valve, to the air box.
just goes from the valve cover to the valve, to the air box.
0 2023/04/20 17:19:01
First time soldering copper pipe. painted it black, only thing that sucked besides my work was fitting it into the rubber grommet on the air box. I'd love to find another grommet but don't know the nomenclature to look one up.
First time soldering copper pipe. painted it black, only thing that sucked besides my work was fitting it into the rubber grommet on the air box. I'd love to find another grommet but don't know the nomenclature to look one up.
0 2023/04/20 17:18:43
Amatuer hour! Subject: hose routing.
Amatuer hour! Subject: hose routing.
0 2023/04/20 17:18:30
Humidity
Humidity
0 2023/03/21 11:17:03
Air temp and location for elevation ref
Air temp and location for elevation ref
0 2023/03/21 11:16:50
5th gear 55 mph
5th gear 55 mph
0 2023/03/21 11:14:53
4th gear 55 mph
4th gear 55 mph
0 2023/03/21 11:14:00
Warming up idle
Warming up idle
0 2023/03/21 11:13:10
4th gear 55 mph
4th gear 55 mph
0 2023/03/21 11:11:53
5th gear 55 mph
5th gear 55 mph
0 2023/03/21 11:11:32
Hot idle
Hot idle
0 2023/03/21 11:10:53
Hot idle
Hot idle
0 2023/03/21 11:10:01
Hot idle
Hot idle
0 2023/03/21 11:09:49
0 2023/03/20 06:21:30
0 2023/02/25 12:05:55
0 2023/02/19 11:25:58
0 2023/02/05 17:20:10
0 2023/01/04 19:51:23
0 2022/12/20 10:41:46
An engine dolly I made because all the local shops were out of small engine stands and I was too dumb to figure out how to spacer bolts and make it fit a larger stand.
An engine dolly I made because all the local shops were out of small engine stands and I was too dumb to figure out how to spacer bolts and make it fit a larger stand.
0 2022/12/20 10:35:07
One of 4 or 6, can't remember. All recessed.
One of 4 or 6, can't remember. All recessed.
0 2022/12/20 10:33:38
0 2022/12/15 02:37:48
0 2022/12/14 14:42:34