Brooklin <Brooklin@primus.ca> wrote in
news:t0ls919j71rvius433ejtr776jdgaljpun@4ax.com:

> Not quite a strictly Honda question, but since I've gotten lots of
> good info here in the past, I'd thought I post here.
>
> I have a '97 Civic that I was putting a new front license plate cover
> on. The bolts were pretty tight, but I loosened them up with WD40.
> The last bolt seemed to turn, but the nut on the inside of the bumper
> was turning and not the screw.
>
> Now I can't get the last bolt off to change the cover (or remove the
> plate).
>
> Any suggestions.



Drill it out.


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/