wink . . .
#1
wink . . .
so i just bought the wink mirror. i took the visors off to mount it. i was wondering how everybody else mounted theirs. I mounted the drivers side where the visor was and made a extender to go from the mirror to the visor mount holes on the passenger . It rattles like crazy now. i didn't really want to put holes in the headline and didn't want the suction cups for the windshield either. Some insight would be greatly appreciated.
#3
Score04w,
I made a bracket incorporating the OEM mirror mounting bolt hole. I drilled a hole into the top of the Wink to secure the mirror. To stop the rattle, brace the mirror using one or both of the bolt holes behind the Wink to create a "tripod" effect. You'll need at least three mounting locations to keep that mirror steady.
I made a DIY post:
http://www.hondafitforums.com/showth...=2754#post2754
I made a bracket incorporating the OEM mirror mounting bolt hole. I drilled a hole into the top of the Wink to secure the mirror. To stop the rattle, brace the mirror using one or both of the bolt holes behind the Wink to create a "tripod" effect. You'll need at least three mounting locations to keep that mirror steady.
I made a DIY post:
http://www.hondafitforums.com/showth...=2754#post2754
Last edited by macbuddy; 10-29-2009 at 05:16 AM.
Thread
Thread Starter
Forum
Replies
Last Post