FIT turbokit
#48
#49
I am quite interested in this too.. Would you be kind enough to PM me a price for the kit and where I would be able to purchase this kit? For some reason that link doesn't work. And I would like to ask for a special request, if you are able to take pictures or the owner of that vehicle able to take some pictures of the top and bottom pictures of the turbo kit? I would like to know how that kit is installed. From top of engine bay and the bottom and bottom back. I hope you or he could also make it in higher resolution because those pictures posted were a little small. Thanks.
Please email the pictures to Compressiondc2@gmail.com .
Much Appreciated.
Please email the pictures to Compressiondc2@gmail.com .
Much Appreciated.
Last edited by KL_FiT; 03-01-2010 at 01:22 PM. Reason: Forgot to post email.
#51
I dont think the piping for the kit will fit USDM Fits.. Remember the JDM fit is smaller, which will require the piping needing to be extended. It may fit left hand drive cars, but most likely not the USDM without modification.
Revo, if you want to sell your product on this site, you must contact Internet brands to become a site sponsor.
Revo, if you want to sell your product on this site, you must contact Internet brands to become a site sponsor.
#52
2010 GE8 RS Honda Jazz A/T
i also using this kit..
enjoy all pics
installation
dyno day session - run 3 175.6hp@6000
night dyno - shell super extra (95 octane) + retuning - xxx hp
J's Racing Fx 60 Ti
dastek unichip type Q+ (w/turbo module) tuning
finished engine bay stage 1
now i'm waiting for wiseco low comp piston + K1 h-beam con rod for bigger boost and atf oil cooler
enjoy all pics
installation
dyno day session - run 3 175.6hp@6000
night dyno - shell super extra (95 octane) + retuning - xxx hp
J's Racing Fx 60 Ti
dastek unichip type Q+ (w/turbo module) tuning
finished engine bay stage 1
now i'm waiting for wiseco low comp piston + K1 h-beam con rod for bigger boost and atf oil cooler
#53
very interested can you do a left hand drive m/t for the usdm ge8 please pm me price and all the other things that i would need to buy that the kit does not come with/ include if i need to build motor in anyway!!! thanks
#59
i just want this kit for its carb number... it would be a dream if it came out in the US.. i personally don't like lowered and cars with wheels... for looks i rather just have 100% stock with an intercooler sitting in the bumper.
Last edited by Vash; 11-14-2011 at 10:08 AM.