2nd Generation (GE 08-present)The New Fit... Generation specific talk and questions here.
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I've got a nice Recaro SRD that I would like to install in my Fit but unfortunately I can't find a seat rail for the new Fit. Anyone has an idea of where I could find one? I called Tees USA (Bride) and they have nothing for a while. I can't find anything on the Recaro web site.
__________________
09 BBP Sport M/T for fun
99 Odyssey for the family Hope you got a big trunk 'cause I'm putting my bike in it!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
1. Import from Japan say $165ish, approx 8 week lead time.
2. Get the sliders from recaro, and get bottom mounts made @ wedge. Little over $200 a side + shipping. Usually takes wedge about 2 weeks.
3. Buy some civic rails and have the base mounts cut and rewelded to fit the car. (probably what I'm going to do). Rails for the civic are $135, if you know a welder, you can probably get it done for $20.
I've got some EK9 rails on the seat right now. I can always get them welded to the GE8 stock rail bottoms but I would like to be able to swap the stock seat back if I need to.
__________________
09 BBP Sport M/T for fun
99 Odyssey for the family Hope you got a big trunk 'cause I'm putting my bike in it!
don't use the stock rails - keep them on your OEM seat. what you need to do is chop off the mounting points of the EK9 rails (part that bolts to the floor), and either move or make new ones.
^^^ it does make sense...I'll probably get some brackets made to fit the EK9 sliders that are on there. The stock GE8 seats are pretty comfy but they don't hold worth sh!t around corners!
__________________
09 BBP Sport M/T for fun
99 Odyssey for the family Hope you got a big trunk 'cause I'm putting my bike in it!
Bride makes RO-type rails for the GE Fits. Those will mate with your Recaro SRDs, no problem. I know because I DIY-installed my own SRDs on them, although my car's a GD1. http://bride-jp.com/pdf/recli-2.pdf (PDF file, install guide for the RO-type seat rails)
The RO-type rails themselves are standard; it's just the feet at the bottom that will differ with every car.
^^ Can you get them in the Philippines fast? Salamat!
The rails? I had to order them from a shop that imports them from Japan. Due to delays I had to wait a couple months for them to get shipped to Manila, although normally they'd take half as long.